So I just started PRS a couple of months ago. I was fixated on how people went from stage to stage collecting their data during pre stage. I was also fascinated with their setups. A couple weeks ago I decided to put together my own spotting setup. Looking at what everyone has I noticed that some people had ready made tac tables and some had home made or 3d printed ones. I had some experience building camera rigs and decided I can use some parts like a cheese plate to build the platform. Now this is just the first iteration and since its modular I can add or subtract parts as I go. I can also do a sliding plate underneath the main platform in case I need more room or If I decided to add a spotting scope. I also 3d Printed a weather vane for the kestrel If I decided to get live wind data. But for now I see myself using the windicator just to see where the wind is blowing. if there are any ideas as to what else I should add or what would be more practical, I'm all ears. Afterall, you guys are the experts. i just love to tinker.
