I got older 3x18x42 IOR 35 mm scope and would like instructions on zeroing and scope set up thanks to anyone that can help
Rifle Scopes NEED HELP WITH IOR
- Thread starter poorboyshooter
- Start date
Re: NEED HELP WITH IOR
I dont have that model but I would say turn the turrets till you hit bullseye. then loosen the allen screws on the side of the turret, turn to zero and retighten the screws. do that for elevation and windage.
I dont have that model but I would say turn the turrets till you hit bullseye. then loosen the allen screws on the side of the turret, turn to zero and retighten the screws. do that for elevation and windage.
Re: NEED HELP WITH IOR
Yeap, just zero the scope then loosen the 4 screws on each turret and turn them until they read zero again. Be sure that you loosen them all if you leave one tight there is a chance the whole thing will turn moving the crosshairs (it will click if reticle is moving).
Yeap, just zero the scope then loosen the 4 screws on each turret and turn them until they read zero again. Be sure that you loosen them all if you leave one tight there is a chance the whole thing will turn moving the crosshairs (it will click if reticle is moving).
Re: NEED HELP WITH IOR
Loosen the screws, rotate back to zero, PRESS DOWN on the knob until you snug two diametrically opposed screws.
Loosen the screws, rotate back to zero, PRESS DOWN on the knob until you snug two diametrically opposed screws.
