Gunsmithing Need measurement off of Rem 700 SA

[JJones75]

Hey guys I need to know the distance between the rear most screw hole on the rear bridge and the rear most screw on the front ring of the rem 700 SA

I'm making a jig and don't have a SA to measure right this second

 

[Hink]

Re: Need measurement off of Rem 700 SA

 

[GasLight]

Re: Need measurement off of Rem 700 SA

any chance you have the same drawing of the long?

DD

 

[JJones75]

Re: Need measurement off of Rem 700 SA

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: DebosDave</div><div class="ubbcode-body">any chance you have the same drawing of the long?

DD </div></div>

LOL , yea no kidding thats awsome where did you get that??

Perfect thanks a ton

 

[Hink]

Re: Need measurement off of Rem 700 SA

Sorry fellas...no luck on the 700LA drawing. I did manage to find a good index of drawings at http://www.homegunsmith.com/cgi-bin/ib3/...ing_1_22_07.pdf but I'm unable to get any closer to the drawing than the list without joining the home gunsmithing forum. Perhaps one of you would be interested, but as machining is something that I admire more than perform, it's just not my brand of scotch.

*Disclaimer* The above drawing is not meant to be engineering advice. Any and all dimensions specified are subject to drawing tolerances, and any chips made in the wrong area are solely the responsibility of the operator.

*Disclaimer in layman's terms* The numbers on the picture ain't guaranteed. If'n you trust without checkin' and put the hole in the wrong place, it's your fault. Don't come whining to me.

 

[coues103]

Re: Need measurement off of Rem 700 SA

the difference between a long action and a short action is .850" longer