• Watch Out for Scammers!

    We've now added a color code for all accounts. Orange accounts are new members, Blue are full members, and Green are Supporters. If you get a message about a sale from an orange account, make sure you pay attention before sending any money!

  • Site updates coming next Wednesday at 8am CT!

    The site will be down for routine maintenance on Wednesday 6/5 starting at 8am CT. If you have any questions, please PM alexj-12!

New 20 MOA Ring Mount for GAP-10, In stock

A10XRIFLE

A10XRIFLE

Gunny Sergeant
Commercial Supporter
Full Member
Minuteman
Mar 26, 2002
1,587
127
55
N Kansas City, MO
www.gaprecision.com
We had Badger make us up a 20 MOA ring mount for the GAP-10, they are 1.270 in height will clear 5x25 S&B and Hensoldt 56 mm scopes as well. they are 34mm tube and come with 30mm reducers for 30mm Scopes. Perfect for all AR type rifles needing 20 MOA for LR Travel.

397488612.jpg



397488614.jpg



In stock ready to ship
 
Re: New 20 MOA Ring Mount for GAP-10

Aaarrrggghhhh!!!!

I just bought one of the BO 34mm cantilever mounts from Triad, but this is EXACTLY what I've been looking for. Timing is everything I guess.

How do I get one?
 
Re: New 20 MOA Ring Mount for GAP-10

Thanks George. I'll give him a call Friday when I'm stateside.

Is it steel or alloy?
 
Re: New 20 MOA Ring Mount for GAP-10

I placed an order this morning for a GAP-10 and actually asked if the sales rep if they sold any one piece AR mounts. He told me no!

I then placed an order for a Bobro mount.. I'll have to check tomorrow and see if it is too late to cancel.
 
Re: New 20 MOA Ring Mount for GAP-10

Nice!!
 
Re: New 20 MOA Ring Mount for GAP-10

Nicely done George. I've been wondering when someone might lower the scope height on these types of builds...
 
Re: New 20 MOA Ring Mount for GAP-10

Very nice set up!
 
Re: New 20 MOA Ring Mount for GAP-10

So is there an upcharge for this on a build, or is it an even swap for the Badger rings that come with it?
 
Re: New 20 MOA Ring Mount for GAP-10

They will be the mount that comes with every GAP-10 and be available for sale on our website as well for other AR Type Rifles.

They will start shipping with all our GAP-10 rifles in 2 weeks
(waititng on inserts for 30 mm tubes)
 
Re: New 20 MOA Ring Mount for GAP-10

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Aubie</div><div class="ubbcode-body">I placed an order this morning for a GAP-10 and actually asked if the sales rep if they sold any one piece AR mounts. He told me no!

I then placed an order for a Bobro mount.. I'll have to check tomorrow and see if it is too late to cancel.

</div></div>

He didnt know they exsisted till last night.
 
Re: New 20 MOA Ring Mount for GAP-10

Perfect timing!
grin.gif


I've been looking at 20MOA bases/mounts for my LR-308 and this is perfect for the already odd rail height of the DPMS smooth side reciever. The fact that it is either 34mm or 30mm is a great feature. Looking forward to these becoming available soon!
 
Re: New 20 MOA Ring Mount for GAP-10

Mine is supposed to be finishing up this week. Can I add it to my order and have it sent later when it comes in or will it delay the rifle until they arrive?
 
Re: New 20 MOA Ring Mount for GAP-10

Love that mount. Ok here's my question. Can I use the 30mm reducers then a 1" reducer? Building off a POF upper I like the mount. But have a 1" 10x mill mill dot Bushnell I'd like to use till I save up some extra cash for a different scope.
 
Re: New 20 MOA Ring Mount for GAP-10

Will these be available in a quick detach latches?
 
Re: New 20 MOA Ring Mount for GAP-10

I'm in for one, just got an AR10 and just ordered a scope. This is perfect timing. Calling Tuesday
 
Re: New 20 MOA Ring Mount for GAP-10

Gonna be dependent upon your optic's ocular. You may be able to fit a KAC300m (flattest I found) under, but it doesn't look like a Troy would be happening.

Personally I see these kind of rifles as precision weapons, and would rather have a good cheekweld than the ability to fit BUIS under my scope since I never found a need for one.

I'm sure YMMV if you play on a 2-way range away from support for a living, but.....
 
Re: New 20 MOA Ring Mount for GAP-10

I love the mount, but I don't have a Gap10. Question is, any chance one of these will fit on an AR10 style rifle that has the rail all the way down the barrel? I have a Noveske N6 with 21in barrel. I notice the Gap10 has the rail cut away for the bell of the scope to fit there. Say I have a 50mm scope, any chance it would fit on my rifle, or is this pretty much made only for the Gap10's rail system?
 
Re: New 20 MOA Ring Mount for GAP-10

Still not in and I got no answer of when they would be today when I talked to Tracy. My GAP-10 is ready to ship and I wanted the 20 MOA base so I am just going to trade in for it when the they get them together.
 
Re: New 20 MOA Ring Mount for GAP-10

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: JonLSU</div><div class="ubbcode-body">I love the mount, but I don't have a Gap10. Question is, any chance one of these will fit on an AR10 style rifle that has the rail all the way down the barrel? I have a Noveske N6 with 21in barrel. I notice the Gap10 has the rail cut away for the bell of the scope to fit there. Say I have a 50mm scope, any chance it would fit on my rifle, or is this pretty much made only for the Gap10's rail system?
</div></div>

I would think this would be too low on a standard AR10/LR308 flattop. The GAP-10s all come with a handguard that requires a "riser" type extension to attach it to the upper receiver. This has the effect of raising the receiver rail height as compared to "standard" AR10/LR308 upper receivers.

Nightforce makes a 1.375" Unimount for standard flattop receivers, and that height is pretty close to perfect for an AR10/LR308.
 
Re: New 20 MOA Ring Mount for GAP-10

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: SS-8541-dono</div><div class="ubbcode-body">any chance for a 35mm model? </div></div>

Anyone...anyone???
 
Re: New 20 MOA Ring Mount for GAP-10

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: vmpgsc</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: JonLSU</div><div class="ubbcode-body">I love the mount, but I don't have a Gap10. Question is, any chance one of these will fit on an AR10 style rifle that has the rail all the way down the barrel? I have a Noveske N6 with 21in barrel. I notice the Gap10 has the rail cut away for the bell of the scope to fit there. Say I have a 50mm scope, any chance it would fit on my rifle, or is this pretty much made only for the Gap10's rail system?
</div></div>

I would think this would be too low on a standard AR10/LR308 flattop. The GAP-10s all come with a handguard that requires a "riser" type extension to attach it to the upper receiver. This has the effect of raising the receiver rail height as compared to "standard" AR10/LR308 upper receivers.

Nightforce makes a 1.375" Unimount for standard flattop receivers, and that height is pretty close to perfect for an AR10/LR308. </div></div>

Roger That. NF#A191
 
Re: New 20 MOA Ring Mount for GAP-10

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: wallmon</div><div class="ubbcode-body">I think if you take out the spacers you've got 35mm. (See first post)</div></div> There's no mention in the OP about 35mm anything. It's a 34mm ring, and the spacers take it down to 30mm.
 
Re: New 20 MOA Ring Mount for GAP-10

I just received the unimount with 30MM inserts and they look great!

Thank you George and Ken! I received my GAP-10 about 6 weeks ago and the Badger rings were not included. I asked Ken about it and requested that if possible, I would wait until the unimount was available with the 30MM inserts and pay the difference. Without asking, Ken put me on the waiting list and sent me the unimount free of charge. I know these are now standard with the GAP-10 but Ken worked this out before they were ready, so I appreciate his proactive approach to correcting the original mistake.

I can't say enough about GA Precision's quality of both their product and their customer service!
 
Re: New 20 MOA Ring Mount for GAP-10

Will a USO 3.2-17x44 TPAL <span style="font-weight: bold">34mm</span> tube fit in this bad boy ? I don't have a S&B PMII for comparison
smile.gif


The erector housing of my scope USO 3.2-17x44 TPAL <span style="font-weight: bold">30mm</span> tube is ~3 in long and ~1.5 in tall.

George said they are 1.270 inch tall but unfortunately my level of incompetence doesn't know which measurement that is...

Thanks in advance!
 
Re: New 20 MOA Ring Mount for GAP-10

I have this same mount only in 1.50 height on order with my S&B 5-25 MSR. The scope should clear on my SR-25 and should have no problem getting a good cheek weld since I have a PRS on my rifle.
The BO # on my mount is 306-64. It's not shown on BO's website yet.
THANKS - out to Hide Vender -Jay @ Optics Specialist for fixing me up with this combo.
 
Re: New 20 MOA Ring Mount for GAP-10, In stock

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: A10XRIFLE</div><div class="ubbcode-body">We had Badger make us up a 20 MOA ring mount for the GAP-10, they are 1.270 in height will clear 5x25 S&B and Hensoldt 56 mm scopes as well. they are 34mm tube and come with 30mm reducers for 30mm Scopes. Perfect for all AR type rifles needing 20 MOA for LR Travel.


In stock ready to ship </div></div>

Hoping this will work for a Premier Light Tactical and my long neck.

Thanks for the 1.27" height but <span style="font-weight: bold"><span style="text-decoration: underline"><span style="font-size: 14pt">how much "extension" is there?</span></span> </span>

I put the tip of my nose on the charging handle and need the scope mounted a bit further forward.

I realize my alternative is to extend the LOP with an adjustable stock (i.e. PRS) but I am trying to keep it simple and keep the standard A2 stock's on my AR's.
 
Re: New 20 MOA Ring Mount for GAP-10, In stock

Works fine on my GAP 10. I use the NTCH as well with a CTR stock.
 
Re: New 20 MOA Ring Mount for GAP-10, In stock

Does anybody have one of these mounted up on a full pic rail in a 50mm S&B scope? My existing mount at 1.5" high is simply too high and would love to drop it down a bit.

Setup is an LMT MWS with 4-16x50 scope. Would love confirmation with a pic that there is enough clearance from the objective to the rail.
 
Re: New 20 MOA Ring Mount for GAP-10

need to order another

here it is with my new USO

DSC_0999.jpg
 
You must log in or register to reply here.

Similar threads

Crypt_keeper
Optics ADM Mount 30mm 20MOA FDE
Replies
9
Views
645
Crypt_keeper
Crypt_keeper
jrsandiego12
Accessories ELR Scope Mount - ERA-TAC 0-20 MRAD increase (=68.75 MOA) $375
Replies
0
Views
56
jrsandiego12
jrsandiego12
firefighter1178
Optics Optics and Mounts
Replies
6
Views
814
firefighter1178
firefighter1178
gnubag
34mm cantilever lpvo mount with 20moa bias and 12 o'clock RDS mount
Replies
10
Views
603
jhern19
jhern19
Jarth
Optics Leupold Mk4 4.5-14x50mm, Badger Unimount, Badger rings *PRICE DROP*
Replies
13
Views
797
Jarth
Jarth
Top Bottom
Back