Rifle Scopes NEW Single Turn knobs for the Premier ?

[ChrisF]

Any one with info on the single turn knobs 15 & 22Mil & CW Elevation knobs .

And what are the options IF any on the windage knobs ?

And the option of NOT having the MTC clicks on all the knobs ?

Later Chris

 

[Luvman]

Re: NEW Single Turn knobs for the Premier ?

Are you sure you want a scope with that much elevation in one turn WITHOUT MTC?

I have the double turn with MTC. With the MTC it's EASY to dial your dope without even looking at the knob. I imagine without MTC it would be very easy to get lost without visually checking where you're at. I wouldn't own a Heritage without MTC. My $.02

 

[ChrisF]

Re: NEW Single Turn knobs for the Premier ?


15 & 22 Mils , are 2-9 Mils MORE than what S&B PMIIs have on their Single Turn scopes .

Nice to have a choice of MORE .

Would ONLY like a hashmark/line reticle LIKE the P4F but better with Numbers every 2 mils on side & bottom crasshairs .

later Chris

 

[Ratbert]

Re: NEW Single Turn knobs for the Premier ?

The single turn knob is actually only 14.2 Mil. There is a space between -0.2 Mil and 14.2 Mil which would have made up the 15th mil in a double turn unit.

I had the 22 Mil turret first, the 14 Mil is definitely much better. They also swapped out the windage turret so that it is 1 click per hash as well. I don't know if they still offer the original two-click-per-hash version or not.

You could probably modify an MTC knob to remove the second detent ball and turn it into a non-MTC knob pretty easily, though I must admit I haven't specifically examined what it would take to do so.

 

[Luvman]

Re: NEW Single Turn knobs for the Premier ?

Ratbert brings up a very good point. buy one with MTC and just remove the MTC detents.

mushy clicks post

 

[ChrisF]

Re: NEW Single Turn knobs for the Premier ?


No , its cheaper BY $100 , to not have the MTC fitted when you buy a scope .

So If you didnot want MTC , save $100 , and spec IT as such from the start .

Later CHris