Rifle Scopes NF scope rings, question...

[kortik]

Gentlemen, if you could please confirm:

NightForce 6 screws rings require T15 Torx bit to tighten the cap screws, correct?

Thanks in advance.

 

[Trigger Monkey]

Yes, 6 screw, 4 screw, and unimounts need a T-15 driver to tighten.

 

[kortik]

Yes, 6 screw, 4 screw, and unimounts need a T-15 driver to tighten.

Thanks very much for your help!
Just wanted to make it absolutely certain, I'm ready to introduce a new torque tool kit, to include 25 and 100 inch-lbs. precision torque limiters (PTLs) and related accessories (T15 torx bit and 1/2" hex socket). Does it make sense to you to have such kit available?
Boris
Borka Tools

 

[Trigger Monkey]

For me personally, I never went to 100 in/lbs on the cross bolt when I had a set of UL six screw rings, it seemed somewhat unnecessary and at the time I didn't have the tools to go that high anyway. I torqued them to 65 in/lbs like I do all my rings and didn't have any issues on a 20" .308.

 

[kortik]

For me personally, I never went to 100 in/lbs on the cross bolt when I had a set of UL six screw rings, it seemed somewhat unnecessary and at the time I didn't have the tools to go that high anyway. I torqued them to 65 in/lbs like I do all my rings and didn't have any issues on a 20" .308.

I really appreciate your feedback. Thanks again!