OBR with can.
- Thread starter Sumpter Steve
- Start date
Re: OBR with can.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: KYS338</div><div class="ubbcode-body">Barrel Length? </div></div>
18"
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: KYS338</div><div class="ubbcode-body">Barrel Length? </div></div>
18"
Re: OBR with can.
I have almost the same exact setup and mine is a tack driver. Make sure you flip the gas block and you should be fine. I shot 180rounds through mine suppressed the last time I took it out and it was still pretty wet after I got done and it cleaned up in a minute with that chromed bolt.
I have almost the same exact setup and mine is a tack driver. Make sure you flip the gas block and you should be fine. I shot 180rounds through mine suppressed the last time I took it out and it was still pretty wet after I got done and it cleaned up in a minute with that chromed bolt.
Re: OBR with can.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: chucky</div><div class="ubbcode-body">I have almost the same exact setup and mine is a tack driver. Make sure you flip the gas block and you should be fine. I shot 180rounds through mine suppressed the last time I took it out and it was still pretty wet after I got done and it cleaned up in a minute with that chromed bolt. </div></div>
Roger that. I just slipped the can on for the pic and I will be sure to flip the gas block before firing.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: chucky</div><div class="ubbcode-body">I have almost the same exact setup and mine is a tack driver. Make sure you flip the gas block and you should be fine. I shot 180rounds through mine suppressed the last time I took it out and it was still pretty wet after I got done and it cleaned up in a minute with that chromed bolt. </div></div>
Roger that. I just slipped the can on for the pic and I will be sure to flip the gas block before firing.
Re: OBR with can.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: mkollman74</div><div class="ubbcode-body">Is that the SF 762K? </div></div>
Yup.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: mkollman74</div><div class="ubbcode-body">Is that the SF 762K? </div></div>
Yup.
Re: OBR with can.
Nice setup. Would one of these handle the load I use for my bolt or would it be a little hot fot it? I shoot 175SMKs over 45.0 of Varget. Would be awesome to use the same load obviously, but are y'all backin it down a little for the semi-autos?
Nice setup. Would one of these handle the load I use for my bolt or would it be a little hot fot it? I shoot 175SMKs over 45.0 of Varget. Would be awesome to use the same load obviously, but are y'all backin it down a little for the semi-autos?
Re: OBR with can.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: R.O.U.S.</div><div class="ubbcode-body">In your experience do you need the cheek riser of the PRS stock? Also, is the hand guard easy to grip? Good luck, your setup is awesome. </div></div>
To get the cheekweld I require I need the cheek riser but others may not. The handguard is very easy to grip and is nice and small.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: R.O.U.S.</div><div class="ubbcode-body">In your experience do you need the cheek riser of the PRS stock? Also, is the hand guard easy to grip? Good luck, your setup is awesome. </div></div>
To get the cheekweld I require I need the cheek riser but others may not. The handguard is very easy to grip and is nice and small.
Re: OBR with can.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: KYpatriot</div><div class="ubbcode-body">Nice setup. Would one of these handle the load I use for my bolt or would it be a little hot fot it? I shoot 175SMKs over 45.0 of Varget. Would be awesome to use the same load obviously, but are y'all backin it down a little for the semi-autos? </div></div>
I was running 44.5 Varget with 175's out of my POF but as always I would recommend that you slowly work up to a load like that rather than detonating your rifle. As far as running the same load for (2) rifles goes, I have never had any luck with that.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: KYpatriot</div><div class="ubbcode-body">Nice setup. Would one of these handle the load I use for my bolt or would it be a little hot fot it? I shoot 175SMKs over 45.0 of Varget. Would be awesome to use the same load obviously, but are y'all backin it down a little for the semi-autos? </div></div>
I was running 44.5 Varget with 175's out of my POF but as always I would recommend that you slowly work up to a load like that rather than detonating your rifle. As far as running the same load for (2) rifles goes, I have never had any luck with that.
Re: OBR with can.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Sumpter Steve</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: mkollman74</div><div class="ubbcode-body">Is that the SF 762K? </div></div>
Yup. </div></div>
Are you running the brake adapter or the flash hider adapter? I can't seem to locate the brake adapter anywhere...
Your setup is pretty much a clone of what I'll be running when I get the 762K. Looks great...
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Sumpter Steve</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: mkollman74</div><div class="ubbcode-body">Is that the SF 762K? </div></div>
Yup. </div></div>
Are you running the brake adapter or the flash hider adapter? I can't seem to locate the brake adapter anywhere...
Your setup is pretty much a clone of what I'll be running when I get the 762K. Looks great...
Re: OBR with can.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: mkollman74</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Sumpter Steve</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: mkollman74</div><div class="ubbcode-body">Is that the SF 762K? </div></div>
Yup. </div></div>
Are you running the brake adapter or the flash hider adapter? I can't seem to locate the brake adapter anywhere...
Your setup is pretty much a clone of what I'll be running when I get the 762K. Looks great... </div></div>
Brake adapter.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: mkollman74</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Sumpter Steve</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: mkollman74</div><div class="ubbcode-body">Is that the SF 762K? </div></div>
Yup. </div></div>
Are you running the brake adapter or the flash hider adapter? I can't seem to locate the brake adapter anywhere...
Your setup is pretty much a clone of what I'll be running when I get the 762K. Looks great... </div></div>
Brake adapter.
Re: OBR with can.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Sumpter Steve</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: mkollman74</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Sumpter Steve</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: mkollman74</div><div class="ubbcode-body">Is that the SF 762K? </div></div>
Yup. </div></div>
Are you running the brake adapter or the flash hider adapter? I can't seem to locate the brake adapter anywhere...
Your setup is pretty much a clone of what I'll be running when I get the 762K. Looks great... </div></div>
Brake adapter. </div></div>
Lucky duck.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Sumpter Steve</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: mkollman74</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Sumpter Steve</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: mkollman74</div><div class="ubbcode-body">Is that the SF 762K? </div></div>
Yup. </div></div>
Are you running the brake adapter or the flash hider adapter? I can't seem to locate the brake adapter anywhere...
Your setup is pretty much a clone of what I'll be running when I get the 762K. Looks great... </div></div>
Brake adapter. </div></div>
Lucky duck.
Re: OBR with can.
One of the finest rifles I have had the pleasure to shoot. I'm just sorry it belongs to a friend of mine and not me! This 16" OBR has an Elite Iron silencer attached and the hits on the steel were 800 yards.
Enjoy yours it is a great platform.
One of the finest rifles I have had the pleasure to shoot. I'm just sorry it belongs to a friend of mine and not me! This 16" OBR has an Elite Iron silencer attached and the hits on the steel were 800 yards.
Enjoy yours it is a great platform.
