Ordering H-S Precision Stock, PST 007 or PST 093?

[Jcas2012]

I am getting ready to order my stock but I am not sure which one of these 2 models I need. The PST 007 says it is for 24-30" barrels but then goes to say it is for the large 5r contour barrels like on the m24. The PST 093 says it is for shorter barrels however the standard Remington varmint models/contour will work as well like the Police.

I have a Remington 700 5r Milspec so I am not sure which one will be better? I don't want a huge gap between my stock and the barrel so I am wondering if the PST 007 will be too much? I know the 5r Milspec is the Remington varmint contour. Any thoughts?

 

[JSTARSZ]

Re: Ordering H-S Precision Stock, PST 007 or PST 093?

My advice would be to call H&S Precision and ask to talk to a stock representative. I did that and got some good information from them and ordered a stock.

 

[biner626]

Re: Ordering H-S Precision Stock, PST 007 or PST 093?

Tryimg to remember from my conversation with HS. If I'm not mistaken the difference is with forend length. The short barrels look out of place in the 007. This I know.
Like the previous poster stated... Contact HS not Stocky's.

 

[SBD47]

Re: Ordering H-S Precision Stock, PST 007 or PST 093?

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Biner626</div><div class="ubbcode-body">Tryimg to remember from my conversation with HS. If I'm not mistaken the difference is with forend length. <span style="color: #FF9900">The short barrels look out of place in the 007. This I know.</span>
Like the previous poster stated... Contact HS not Stocky's. </div></div>

<span style="font-weight: bold">It's a matter of personal preference. Personally, I like the look of the longer forend on a 20" gun. I vote for getting the PST007. The difference in the barrel contour is only .10"(.850" to .950"). Not a big deal, and it allows room for upgrading to a larger contour(M24 .950") barrel in the future without having to modify your stock.

My Rem 700 AAC-SD in HS Precision PST012</span>

 

[Jcas2012]

Re: Ordering H-S Precision Stock, PST 007 or PST 093?

Ah ok I got ya. That makes sense as I just looked at both of the OAL and there is a difference of a couple inches. I am assuming the stock that came off my 5r was of PST007 length then, which would be a regular full size stock?

 

[SBD47]

Re: Ordering H-S Precision Stock, PST 007 or PST 093?

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: JCas45</div><div class="ubbcode-body">Ah ok I got ya. That makes sense as I just looked at both of the OAL and there is a difference of a couple inches. I am assuming the stock that came off my 5r was of PST007 length then, which would be a regular full size stock? </div></div>

<span style="font-weight: bold">The PST007 is the regular length stock. If your 5R is 24", it would have come with a stock of that length. They make the shorter PST093 for 18"-20" barrels, but personally I like the regular length PST007 on 20" guns. </span>

 

[biner626]

Re: Ordering H-S Precision Stock, PST 007 or PST 093?

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: SBD47</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Biner626</div><div class="ubbcode-body">Tryimg to remember from my conversation with HS. If I'm not mistaken the difference is with forend length. <span style="color: #FF9900">The short barrels look out of place in the 007. This I know.</span>
Like the previous poster stated... Contact HS not Stocky's. </div></div>

<span style="font-weight: bold">It's a matter of personal preference. Personally, I like the look of the longer forend on a 20" gun. I vote for getting the PST007. The difference in the barrel contour is only .10"(.850" to .950"). Not a big deal, and it allows room for upgrading to a larger contour(M24 .950") barrel in the future without having to modify your stock.

My Rem 700 AAC-SD in HS Precision PST012</span>

</div></div>
But, it makes your barrel look shorter.

 

[SBD47]

Re: Ordering H-S Precision Stock, PST 007 or PST 093?

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Biner626</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: SBD47</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Biner626</div><div class="ubbcode-body">Tryimg to remember from my conversation with HS. If I'm not mistaken the difference is with forend length. <span style="color: #FF9900">The short barrels look out of place in the 007. This I know.</span>
Like the previous poster stated... Contact HS not Stocky's. </div></div>

<span style="font-weight: bold">It's a matter of personal preference. Personally, I like the look of the longer forend on a 20" gun. I vote for getting the PST007. The difference in the barrel contour is only .10"(.850" to .950"). Not a big deal, and it allows room for upgrading to a larger contour(M24 .950") barrel in the future without having to modify your stock.

My Rem 700 AAC-SD in HS Precision PST012</span>

</div></div>
<span style="color: #FF0000">But, it makes your barrel look shorter.

</span> </div></div>

<span style="font-weight: bold">How short will it look with a suppressor attached?

</span>

 

[biner626]

Re: Ordering H-S Precision Stock, PST 007 or PST 093?

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: SBD47</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Biner626</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: SBD47</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Biner626</div><div class="ubbcode-body">Tryimg to remember from my conversation with HS. If I'm not mistaken the difference is with forend length. <span style="color: #FF9900">The short barrels look out of place in the 007. This I know.</span>
Like the previous poster stated... Contact HS not Stocky's. </div></div>

<span style="font-weight: bold">It's a matter of personal preference. Personally, I like the look of the longer forend on a 20" gun. I vote for getting the PST007. The difference in the barrel contour is only .10"(.850" to .950"). Not a big deal, and it allows room for upgrading to a larger contour(M24 .950") barrel in the future without having to modify your stock.

My Rem 700 AAC-SD in HS Precision PST012</span>

</div></div>
<span style="color: #FF0000">But, it makes your barrel look shorter.

</span> </div></div>

<span style="font-weight: bold">How short will it look with a suppressor attached?

</span> </div></div>
Touche sir!