I'm loading for a new noveske 18" spr rifle with 77smk. Ive tried a little Tac and Varget. No luck yet. I know it shoots cause I got a .4" group with Hornady 55TAP. Anybody have a go to load with their Noveske chambers?
- Thread starter Tangodown911
- Start date
Re: Pointers for 77smk in Noveske 18" stainless?
I used to use 24.0gr of Reloder 15, a CCI #41 and Winchester brass. Was doing 2650-ish from my 18" Noveske SPR and good precision.
I now shoot the 70gr Berger VLD for much more speed with equal BC and probably better precision.
I used to use 24.0gr of Reloder 15, a CCI #41 and Winchester brass. Was doing 2650-ish from my 18" Noveske SPR and good precision.
I now shoot the 70gr Berger VLD for much more speed with equal BC and probably better precision.
Re: Pointers for 77smk in Noveske 18" stainless?
I use 24.5 gr of N-140 REM 7.5 primer in detailed LC brass (same year). I haven't shot it at 100 in a while, but I shot a 5-shot group at 400 last week that measured 1/2 moa. It runs about 2640-2660 fps and is a solid load to 600 yard.
I use 24.5 gr of N-140 REM 7.5 primer in detailed LC brass (same year). I haven't shot it at 100 in a while, but I shot a 5-shot group at 400 last week that measured 1/2 moa. It runs about 2640-2660 fps and is a solid load to 600 yard.
