Is it safe to use a de-primed primer again? They are new but the brass was pulled so I need to resize. I cant take the de-capping pin out of the Lee die i'm using.
- Thread starter elkkid3
- Start date
Re: Primer Question.
That sucks. If you back out the primer slowly, you can re-use them. You can get any other FL sizer with the decapping pin taken out and not remove the primer and still size while keeping the primer seated.
That sucks. If you back out the primer slowly, you can re-use them. You can get any other FL sizer with the decapping pin taken out and not remove the primer and still size while keeping the primer seated.
Re: Primer Question.
I would not muck with it just to save 3.5 cents a primer.
But that's me,
Bob
I would not muck with it just to save 3.5 cents a primer.
But that's me,
Bob
Re: Primer Question.
I have used a Lee COLLET die to neck size primed-brass (LC brass with crimped-in primers for AR target shooting). I modified the neck mandrel by grinding off the decapping pin--you can get spares from Lee.
I have used a Lee COLLET die to neck size primed-brass (LC brass with crimped-in primers for AR target shooting). I modified the neck mandrel by grinding off the decapping pin--you can get spares from Lee.
Re: Primer Question.
Ive shot primers that have been removed and reinstalled.
But i agree with Bob on this one
Ive shot primers that have been removed and reinstalled.
But i agree with Bob on this one
Re: Primer Question.
Gotta go with Bob on this one...3.5 cents, I know the economy is bad but there's too much that can go wrong here to save a few pennies
Gotta go with Bob on this one...3.5 cents, I know the economy is bad but there's too much that can go wrong here to save a few pennies
Similar threads
