Problem loading 5R Milspec

[HOG0317]

Hey guys, I just picked up my first 5R Milspec today. I can BARELY load 4 rounds into the magazine. When I do, the bolt will push the round forward about 1/2 inch then slide over it, scraping along the case. Anyone else have this problem with a new rifle? I'm hoping it just needs to be broken in a little, but I don't know.

Thanks for any help.
-Mike

 

[gunslinger169]

Re: Problem loading 5R Milspec

Take it apart and make sure the mag box is setting correct,I had a Sendero that did the same thing.

 

[Oddball Six]

Re: Problem loading 5R Milspec

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: HOG0317</div><div class="ubbcode-body">Hey guys, I just picked up my first 5R Milspec today. I can BARELY load 4 rounds into the magazine. When I do, the bolt will push the round forward about 1/2 inch then slide over it, scraping along the case. Anyone else have this problem with a new rifle? I'm hoping it just needs to be broken in a little, but I don't know.

Thanks for any help.
-Mike </div></div>

That is definitely NOT normal and is likely not a break-in issue. I would definitely check the assembly and if it is wrong, get Remington to fix it.

 

[HOG0317]

Re: Problem loading 5R Milspec

Thanks guys. This pisses the fuck out of me because I had a riflesmith do some work on it. I would have thought he'd catch something like this.

 

[Target In Sight]

Re: Problem loading 5R Milspec

I dont think gunsmith will check the mag box, mine had similar issue before I switch it to AICS. my advise is to get a detachable mag system. Not only it solves the problem once for all, but also much easier to reload.

 

[Maelstrom]

Re: Problem loading 5R Milspec

If you put a single round in the magazine will it load it properly? This might be a long shot but does the rifle have the J-Key safety on the bolt? Could that be turned on and what is preventing the rounds from being loaded properly?

 

[HOG0317]

Re: Problem loading 5R Milspec

So I just got home from the range. The problem was the handloads he gave me. I bought a box of FGM 168 grain and compared it to his 168 handloads. His ammo looked like the bullets weren't seated all the way or something because they were a little bit longer than the FGM. The FGM loaded and fed perfectly. Oh and I couldn't shoot a group bigger than 1/2 MOA if I tried. I'm in love haha. I'll try and get some pics up soon.

 

[callen3615]

Re: Problem loading 5R Milspec

My 700 will do this if you put the rounds too close to the bolt. I have learned that I have to angle the bolt downwards to catch the case.


It didnt really bother me that much...

 

[sticshooter]

Re: Problem loading 5R Milspec

you will love the r5,been one of the most accurate factory rifles i've ever owned.if you get a chance,try some 175's.they really love them.

 

[HOG0317]

Re: Problem loading 5R Milspec

I intend to shoot some 175 SMK soon

 

[callen3615]

Re: Problem loading 5R Milspec

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: HOG0317</div><div class="ubbcode-body">Oh and I couldn't shoot a group bigger than 1/2 MOA if I tried. I'm in love haha. I'll try and get some pics up soon. </div></div>

My pss will shoot .5 moa with any ammo I feed it.

A 12$ box of pmc bronze shoots .5 moa!

 

[HOG0317]

Re: Problem loading 5R Milspec

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: cpt. obvious</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: HOG0317</div><div class="ubbcode-body">Oh and I couldn't shoot a group bigger than 1/2 MOA if I tried. I'm in love haha. I'll try and get some pics up soon. </div></div>

My pss will shoot .5 moa with any ammo I feed it.

A 12$ box of pmc bronze shoots .5 moa! </div></div>

Well I'm still happy... so there!

 

[JMBdevotee]

Re: Problem loading 5R Milspec

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: HOG0317</div><div class="ubbcode-body">So I just got home from the range. The problem was the handloads he gave me. I bought a box of FGM 168 grain and compared it to his 168 handloads. His ammo looked like the bullets weren't seated all the way or something because they were a little bit longer than the FGM. The FGM loaded and fed perfectly. Oh and I couldn't shoot a group bigger than 1/2 MOA if I tried. I'm in love haha. I'll try and get some pics up soon. </div></div>

I had the same problem. If I load between 2.830 and 2.860 COAL they will still fit in the magazine but will not feed. Glad you like your 5R, mine has been a great shooting rifle.