Here's the full description with a link to the Palmetto product: 10.5" CARBINE-LENGTH 5.56 NATO 1/7 NITRIDE 12" SLANT M-LOK MOE EPT SBA3 PISTOL KIT
Barrel Length: 10.5"
Barrel Profile: A2
Gas System: Carbine-Length
Barrel Steel: 4150V Chrome Moly Vanadium
Barrel Finish: Nitride
Chrome Lining: No
Muzzle Thread: 1/2x28
Chamber: 5.56 NATO
Twist Rate: 1:7
Barrel Extension: M4
Diameter at Gas Block: .750
Gas Block Type: Low-profile
Muzzle Device: PSA Fluted Flash Can
Receiver Material: Forged 7075 T6 Aluminum
Receiver Type: M4
Handguard Type: PSA 12" Slant End M-Lok Rail
Bolt Carrier Group Included: Yes
Bolt Steel: Carpenter 158
Bolt Carrier Profile: Full-auto
Charging Handle Included: Yes
Overall Length: 21"
Build Kit: MOE SBA3 EPT Pistol Kit, Black
Extras: Magpul MBUS front/rear sites, Magpul front handguard - see pictures below.
I bought this about a year ago, attached the upper and brace to another pistol I had put together, mounted a red dot, a Magpul front handguard and Magpul front/rear flip up sites...and just stared at it. It's time to re-home this to someone that will use it. It has never been shot. Fondled lightly and respectfully, but never shot. The charging handle and buffer tube reflect the fact that it was cycled several times but never shot. You can see a very faint witness mark on the upper receiver where the red dot was mounted. The lower parts kit, trigger group, etc. are still sealed in their original bags. This does not include a lower receiver.
$500 shipped to your door in the lower 48. Payment via Paypal F&F, Paypal goods + 3% or USPS MO.
Barrel Length: 10.5"
Barrel Profile: A2
Gas System: Carbine-Length
Barrel Steel: 4150V Chrome Moly Vanadium
Barrel Finish: Nitride
Chrome Lining: No
Muzzle Thread: 1/2x28
Chamber: 5.56 NATO
Twist Rate: 1:7
Barrel Extension: M4
Diameter at Gas Block: .750
Gas Block Type: Low-profile
Muzzle Device: PSA Fluted Flash Can
Receiver Material: Forged 7075 T6 Aluminum
Receiver Type: M4
Handguard Type: PSA 12" Slant End M-Lok Rail
Bolt Carrier Group Included: Yes
Bolt Steel: Carpenter 158
Bolt Carrier Profile: Full-auto
Charging Handle Included: Yes
Overall Length: 21"
Build Kit: MOE SBA3 EPT Pistol Kit, Black
Extras: Magpul MBUS front/rear sites, Magpul front handguard - see pictures below.
I bought this about a year ago, attached the upper and brace to another pistol I had put together, mounted a red dot, a Magpul front handguard and Magpul front/rear flip up sites...and just stared at it. It's time to re-home this to someone that will use it. It has never been shot. Fondled lightly and respectfully, but never shot. The charging handle and buffer tube reflect the fact that it was cycled several times but never shot. You can see a very faint witness mark on the upper receiver where the red dot was mounted. The lower parts kit, trigger group, etc. are still sealed in their original bags. This does not include a lower receiver.
$500 shipped to your door in the lower 48. Payment via Paypal F&F, Paypal goods + 3% or USPS MO.
Last edited:
