wondering what suppressor would work best on my PSL? any input or suggestions? will have to get the pinned flash hider off first and thread the barrel 14 x 1 LH.
Suppressors PSL Suppressor
- Thread starter lmc8541
- Start date
Re: PSL Suppressor
If you thread the barrel 5/8 24 you will have a better selection of flash hiders/mounts to chose from. The 5/8 24 thread is a common thread for 7.62mm or 30 cal rifles. I like the AAC 762SD.
If you thread the barrel 5/8 24 you will have a better selection of flash hiders/mounts to chose from. The 5/8 24 thread is a common thread for 7.62mm or 30 cal rifles. I like the AAC 762SD.
Re: PSL Suppressor
just figured I'd go with the European standard. I like the SVD flash hider which will go on when the cans not on it.
just figured I'd go with the European standard. I like the SVD flash hider which will go on when the cans not on it.
Re: PSL Suppressor
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: bladesmith2</div><div class="ubbcode-body">If you thread the barrel 5/8 24 you will have a better selection of flash hiders/mounts to chose from. The 5/8 24 thread is a common thread for 7.62mm or 30 cal rifles. I like the AAC 762SD. </div></div>
Was reading a post on another forum where a 762SD was giving a guy almost 18" of drop at 100yds with a pencil thin barrel on an AR10 - imagine you'd have the same issue with a PSL. Those thin barrels don't cope well when hanging all that weight on the end. You could always get a titanium supppressor, but then your putting a suppressor that would cost 2-3x what a PSL runs.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: bladesmith2</div><div class="ubbcode-body">If you thread the barrel 5/8 24 you will have a better selection of flash hiders/mounts to chose from. The 5/8 24 thread is a common thread for 7.62mm or 30 cal rifles. I like the AAC 762SD. </div></div>
Was reading a post on another forum where a 762SD was giving a guy almost 18" of drop at 100yds with a pencil thin barrel on an AR10 - imagine you'd have the same issue with a PSL. Those thin barrels don't cope well when hanging all that weight on the end. You could always get a titanium supppressor, but then your putting a suppressor that would cost 2-3x what a PSL runs.
Re: PSL Suppressor
Call Tim at SAS. He can make what you want. I would go with Ti
can because of the weight. I had thought of getting one and removing the front sight assy and doing an over the barrel
mount can.
Call Tim at SAS. He can make what you want. I would go with Ti
can because of the weight. I had thought of getting one and removing the front sight assy and doing an over the barrel
mount can.
Re: PSL Suppressor
I know this is kind of an old thread, but I'm in a similar situation. I'm going with the YHM Stainless Phantom, because it mounts with a quick detach flash hider. This way I can move the can to my FAL, as well as any .308 guns I may buy in the future.
AFAIK, the only companies that make QD flashhiders in 1x14mm LH are Yankee Hill Machine, and Smith Enterprises. The SEI flashhider is their Vortex model, which is pretty useful by itself, but they only sell their suppressors to military and law enforcement.
I know this is kind of an old thread, but I'm in a similar situation. I'm going with the YHM Stainless Phantom, because it mounts with a quick detach flash hider. This way I can move the can to my FAL, as well as any .308 guns I may buy in the future.
AFAIK, the only companies that make QD flashhiders in 1x14mm LH are Yankee Hill Machine, and Smith Enterprises. The SEI flashhider is their Vortex model, which is pretty useful by itself, but they only sell their suppressors to military and law enforcement.
Similar threads
