Im having issues with my RCBS seater die crushing the top part of the ogive just below the polymer tip. Its only happening on .22 cal 75gr AMAXs. Anyone have any other dies they would reccommend that would work without this happening?
RCBS seating die crushing 75gr AMAXs
- Thread starter InTheWeeds
- Start date
Re: RCBS seating die crushing 75gr AMAXs
me thinks you need some sizing wax to make things go a tad smoother
me thinks you need some sizing wax to make things go a tad smoother
Re: RCBS seating die crushing 75gr AMAXs
Yes, most dies are not set up for the long match bullets. The RCBS die seating stem is tapered for a standard bullet. The Redding comp seater will work fine. A Hornady seater with the A-max seating stem will also work. If you are running a heavily compressed load seated at mag length, then you may still get a slight ring.
Yes, most dies are not set up for the long match bullets. The RCBS die seating stem is tapered for a standard bullet. The Redding comp seater will work fine. A Hornady seater with the A-max seating stem will also work. If you are running a heavily compressed load seated at mag length, then you may still get a slight ring.
