who makes the most accurate ar 10 barrels
- Thread starter 308mike
- Start date
Re: rebarrel my dpms ar 10?
Bartlein Barrels for the MTFW.
They only come as blanks though.
Bartlein Barrels for the MTFW.
They only come as blanks though.
Re: rebarrel my dpms ar 10?
thanks I,ll check them out
thanks I,ll check them out
Re: rebarrel my dpms ar 10?
Noveske barrels are made by pacnor, i have their 21' and it is 1/2 MOA with good ammo. plus they are drop in.
hope this helps.
Noveske barrels are made by pacnor, i have their 21' and it is 1/2 MOA with good ammo. plus they are drop in.
hope this helps.
Re: rebarrel my dpms ar 10?
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: attherange</div><div class="ubbcode-body">Noveske barrels are made by pacnor, i have their 21' and it is 1/2 MOA with good ammo. plus they are drop in.
hope this helps. </div></div>
Same thing and results here but on an AR10 not a DPMS platform.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: attherange</div><div class="ubbcode-body">Noveske barrels are made by pacnor, i have their 21' and it is 1/2 MOA with good ammo. plus they are drop in.
hope this helps. </div></div>
Same thing and results here but on an AR10 not a DPMS platform.
Re: rebarrel my dpms ar 10?
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: attherange</div><div class="ubbcode-body">Noveske barrels are made by pacnor, i have their 21' and it is 1/2 MOA with good ammo. plus they are drop in.
hope this helps. </div></div>
Except the OP's rifle is NOT AN AR-10...its an LR-308 (or DPMS/KAC pattern rifle)!
The Noveske barrels are mated to an Armalite-style extensions which will NOT work 100% on a DPMS LR-308 rifle...only on an Armalite AR-10 style rifle. The DPMS LR-308 rifles use a different extension.
There are several sources available for an LR-308 aftermarket barrel. If you want a drop-in, ready to install unit, check with Rainier Arms on their .308 UltraMatch Shilen barrels:
http://www.rainierarms.com/?page=shop/detail&product_id=2233 - 24"
http://www.rainierarms.com/?page=shop/detail&product_id=2239 - 20"
http://www.rainierarms.com/?page=shop/detail&product_id=2236 - 18"
http://www.rainierarms.com/?page=shop/detail&product_id=2338 - 16"
Also, check with Krieger as they offer finished barrels (but the wait time may be more than you want to bear...you'll have to check with them to find out the possibel wait). They are made-to-order, so you will have to send them your bolt and then they'll take a blank and finish it for you from there, including chambering, headspacing to your bolt, etc.
http://www.kriegerbarrels.com/AR_10DPMS_LR-c1246-wp3393.htm#AR-10/DPMS-LR
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: attherange</div><div class="ubbcode-body">Noveske barrels are made by pacnor, i have their 21' and it is 1/2 MOA with good ammo. plus they are drop in.
hope this helps. </div></div>
Except the OP's rifle is NOT AN AR-10...its an LR-308 (or DPMS/KAC pattern rifle)!
The Noveske barrels are mated to an Armalite-style extensions which will NOT work 100% on a DPMS LR-308 rifle...only on an Armalite AR-10 style rifle. The DPMS LR-308 rifles use a different extension.
There are several sources available for an LR-308 aftermarket barrel. If you want a drop-in, ready to install unit, check with Rainier Arms on their .308 UltraMatch Shilen barrels:
http://www.rainierarms.com/?page=shop/detail&product_id=2233 - 24"
http://www.rainierarms.com/?page=shop/detail&product_id=2239 - 20"
http://www.rainierarms.com/?page=shop/detail&product_id=2236 - 18"
http://www.rainierarms.com/?page=shop/detail&product_id=2338 - 16"
Also, check with Krieger as they offer finished barrels (but the wait time may be more than you want to bear...you'll have to check with them to find out the possibel wait). They are made-to-order, so you will have to send them your bolt and then they'll take a blank and finish it for you from there, including chambering, headspacing to your bolt, etc.
http://www.kriegerbarrels.com/AR_10DPMS_LR-c1246-wp3393.htm#AR-10/DPMS-LR
Re: rebarrel my dpms ar 10?
thanks for all the helpful info. sweet i have a shilen on my 308 bolt gun and am very pleased with it
thanks for all the helpful info. sweet i have a shilen on my 308 bolt gun and am very pleased with it
Re: rebarrel my dpms ar 10?
You can also get very nice barrels for either DPMS style or AR10 style rifles from Lothar Walther. They made the barrel for my MA TEN Monolithic I'm building.
You can also get very nice barrels for either DPMS style or AR10 style rifles from Lothar Walther. They made the barrel for my MA TEN Monolithic I'm building.
Re: rebarrel my dpms ar 10?
has anyone put one of these shilens on a dpms
has anyone put one of these shilens on a dpms
Re: rebarrel my dpms ar 10?
I have the 24 inch stainless dpms and it shoots a little under moa but would like it to shoot better
I have the 24 inch stainless dpms and it shoots a little under moa but would like it to shoot better
Re: rebarrel my dpms ar 10?
Have you tried replacing the trigger?
Have you tried replacing the trigger?
Re: rebarrel my dpms ar 10?
What trigger is in it and what ammo? I have the same rifle with a little bit (very little and cheap) work and it shoots 1/2 MOA all day and then some, on a good day for me its 5 rounds under dimes and that covers the entire hole not just the centers
What trigger is in it and what ammo? I have the same rifle with a little bit (very little and cheap) work and it shoots 1/2 MOA all day and then some, on a good day for me its 5 rounds under dimes and that covers the entire hole not just the centers
Re: rebarrel my dpms ar 10?
jp and its scaled at 3lbs it shot better but i am aproaching the 6000 round mark and cleaning is not helping any longer
jp and its scaled at 3lbs it shot better but i am aproaching the 6000 round mark and cleaning is not helping any longer
Re: rebarrel my dpms ar 10?
hers a funny thing, I bought the rifle new from scheels and it was about five pounds so i took it out and polished the sear and hammer and readjusted it and it was 2 pounds so i took it out and shot it. could not help but bump fire it so i called jp and they told me they were shipped with wrong springs and they sent me the correct ones at no cost which brought the trigger back to 3lbs
hers a funny thing, I bought the rifle new from scheels and it was about five pounds so i took it out and polished the sear and hammer and readjusted it and it was 2 pounds so i took it out and shot it. could not help but bump fire it so i called jp and they told me they were shipped with wrong springs and they sent me the correct ones at no cost which brought the trigger back to 3lbs
Re: rebarrel my dpms ar 10?
The barrel I'm considering right now is the Lilja AR10 barrels . Not the same quality as a Bartlein or a Krieger, but for $450 you get a drop in barrel that will most likely shoot better than I can.
The barrel I'm considering right now is the Lilja AR10 barrels . Not the same quality as a Bartlein or a Krieger, but for $450 you get a drop in barrel that will most likely shoot better than I can.
Re: rebarrel my dpms ar 10?
thinkin Im goin with the shilen
thinkin Im goin with the shilen
