Re: Reloading literature?
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Lindy</div><div class="ubbcode-body">Glen Zediker, <span style="font-style: italic">Handloading for Competition</span>
There's a brief discussion of it in this thread:
http://www.snipershide.com/forum/ubbthreads.php?ubb=showflat&Number=2315584#Post2315584
</div></div>
+10 trillion
This is a very good book, though not necessarily a "How-to". It has lots of good info, and great explanations for why he might or might not do a particular thing when reloading (as well as how he goes about doing them), but it's NOT an instruction manual. In fact, he states this outright in his introductory material. It is not a book for beginners or those without a basic foundation from which to start (the first topic he covers is separating brass by neck wall uniformity!)
It is however the best reloading book I've read, and one all <span style="text-decoration: line-through">reloaders</span> hand loaders who care about their craft should read.
If you're looking for a good "How-to", I would start with the
Lyman Manual.
IMO, it has the BEST introductory material of all of the major reloading manuals. The introductory material is generally where they walk you through the entire process and explain the basic concepts in some detail, but without the fluff of very advanced bench rest techniques. It also has a very good section on powders.
The loads in the actual data, IMO, are VERY conservative (I have seen max loads that are LESS than minimum loads published in other manuals), but it is a good foundation from which to built.
I find myself buying a manual for EVERY BRAND bullet I use (I have Hornady 7th and 8th eds, Lapua, Speer, Sierra, Berger), as well as EVERY BRAND powder (though Hodgdon is free online, as well as VV). I also have the Lee manual which I find to be lacking in lots of areas.
I would start with the Lyman manual for the Intro material (read it twice), then one for each brand bullet you buy (if they have one of course).
Get some experience with loading and gain a foundation for hand loading, THEN (and only then) get Handloading for Competition and soak up what you can.