Rem 700 extractor

[Yote Klr]

I need an extractor for a magnum bolt. Brownells and Midway are both out of stock, does anyone know who has these in stock?

Thanks.

 

[Trigger Monkey]

For the time being, you could be shit out of luck, I mean Remington just went into bankruptcy, got parted out, and now who the hell knows what's going to happen since that Round Hill group bought up the physical machines and what not. Any small parts like that that were out there probably got bought up so that people had spares. I've looked around myself for a standard bolt face rivetless extractor and have pretty much come to the conclusion that if I need one I'll probably just send the bolt out to get a M16 extractor put in.

 

[Yote Klr]

I know. This sux donkey balls!

 

[smoothy8500]

Oh dear, it looks like we'll have to start lurking in e-bay...

 

[Yote Klr]

Too late, spent at least 3 hours
searching everywhere...no dice.

 

[Sierra770]

For the time being, you could be shit out of luck, I mean Remington just went into bankruptcy, got parted out, and now who the hell knows what's going to happen since that Round Hill group bought up the physical machines and what not. Any small parts like that that were out there probably got bought up so that people had spares. I've looked around myself for a standard bolt face rivetless extractor and have pretty much come to the conclusion that if I need one I'll probably just send the bolt out to get a M16 extractor put in.

I believe this is the A answer.

 

[Yote Klr]

Anyone prefer a m16 vs sako extractor?

 

[gnochi]

Anyone prefer a m16 vs sako extractor?

M16 is more mechanically robust if there’s a severely over pressure cartridge. It’s much less likely to hit someone in the eye.

 

[spooledup]

I need an extractor for a magnum bolt. Brownells and Midway are both out of stock, does anyone know who has these in stock?

Thanks.

Call up Chad @LongRifles Inc. He should have a few laying around.

 

[RTH1800]

One way or another LRI folks can sort it out.

 

[powdahound76]

If you find some, buy more than 1.

Even if you go M16 from LRI, buy the spare parts.
anything less is unprepared.

I say this to remind myself too.

 

[Yote Klr]

Been shooting magnum 700s for many many years, never had to need one until now. Of course.

 

[Mrpike71]

Been shooting magnum 700s for many many years, never had to need one until now. Of course.

That sucks, if I had one laying around I would send it your way. I'll also recommend the LRI M16, I had this done to my 308. If you do go this route, have the double ejector mod done as well though, otherwise you'll probably be ejecting cases into your scope turret.

 

[LRI]

There seems to be a big surge for this part and we our working our tails off to answer it. I've been working on the variant were using for our new Tikka bolts and the Remmy stuff will follow right afterward.

Not too much longer gents. I've got OEM's breathing down my neck for it too so its a big deal for us.

SOON

 

[Biggie1976]

For the uneducated such as myself what does the M16 extractor help with or what's the gain other than more robust as mentioned above?

My apologies if I derailed the thread.