I have this glued in barreled action with both trigger guard screws removed & still can't lift barreled assembly out..what to do? There is movement but won't fully release. Thanks, xray9
Gunsmithing Rem. M700 stock removal
- Thread starter xray9
- Start date
Re: Rem. M700 stock removal
Get a 1/2" oak dowel rod, grind, sand or cut a very shallow angle on one end. Start at the front end of the forestock and gently tap it down toward the receiver group lifting up on the barrel at the same time.
Get a 1/2" oak dowel rod, grind, sand or cut a very shallow angle on one end. Start at the front end of the forestock and gently tap it down toward the receiver group lifting up on the barrel at the same time.
Similar threads
