I have a remington 700 PSS in 300 Win mag. It shoots good, but I believe there is room for improvement. Any of our smiths here do an accurizing job for a reasonable price? Im looking for truing of the receiver and bolt lugs, oversize recoil lug, rechamber and set back the factory barrel, thread barrel to 5/8 x 24, and open up scope base mounting holes to 8-40.
Gunsmithing Rem PSS accurizing
- Thread starter glock63
- Start date
Re: Rem PSS accurizing
$750 bucks.
6 days.
Includes a tig'd bolt handle.
I. Bore/thread mill the base screws based on bore center, not where the holes are already.
Prolly want to consider a ceracoat job too as the lathe really grabs the barrel during chambering work. Same for the action while accurizing it.
Be glad to help.
C.
$750 bucks.
6 days.
Includes a tig'd bolt handle.
I. Bore/thread mill the base screws based on bore center, not where the holes are already.
Prolly want to consider a ceracoat job too as the lathe really grabs the barrel during chambering work. Same for the action while accurizing it.
Be glad to help.
C.
