Rimefire training aid & targets

[MEAT4272]

Hello Folks,

I've discovered .22 snap caps as they are, do not work well. The base of the sanp cap breaks off after a firing pin strike, leaving the the broken simulation round in the chamber. My fix was to combine a modified snap cap and a spent .22 case, creating a reuseable item. It has worked great for me so far.

"USE THESE IMPROVED SNAP CAPS AT YOUR OWN RISK!"

 

[MEAT4272]

Re: Rimefire training aid & targets

This 50 Yard 1/4" Dot target, is the same size dot found in Stage 4 (30 point) on the 50 yard TRC target.

Mindflow.com's target options:
1. Page Size: Letter (11" X 8.5")
2. Layout: Columns- 9 Rows- 7
3. Calibration Diagram: unchecked
4. BullsEye Size: 5mm
5. Line Width: 0.4mm
6. Space: 1mm (This option doesn't matter for this target)
7. #Circles: 1
8. Circles to Fill: 1-Bulls Eye(Middle Only)
9. Fill Color: #000000
10. Line Color: #000000
11. Print Numbers: No
12. Crosshair: Line Width 0mm

Using the target creator, these target dots are a true 1/4".

 

[MEAT4272]

Re: Rimefire training aid & targets

This 50 yard 3/4" 5 shot group target, is the same size circle as the Stage 3 portion of the 50 Yard TRC target.

Mindflow.com's target options:
1. Page Size: Letter (11" X 8.5")
2. Layout: Columns- 5 Rows- 4
3. Calibration Diagram: unchecked
4. BullsEye Size: 2mm
5. Line Width: 0.4mm
6. Space: 7.5mm
7. #Circles: 2
8. Circles to Fill: 1-Bulls Eye(Middle Only)
9. Fill Color: #ff0000
10. Line Color: #000000
11. Print Numbers: No
12. Crosshair: Line Width 0mm

Using the target creator, these target circles are a true 3/4".

 

[MEAT4272]

Re: Rimefire training aid & targets

100 yard 1" Bulls Eye with a 2" 10-Ring, this is the same size Bulls Eye and 10 ring as a TQ-4.

Mindflow.com's target options:
1. Page Size: Letter (11" X 8.5")
2. Layout: Columns- 3 Rows- 2
3. Calibration Diagram: unchecked
4. BullsEye Size: 24mm
5. Line Width: 0.6mm
6. Space: 12mm
7. #Circles: 3
8. Circles to Fill: 1-Bulls Eye(Middle Only)
9. Fill Color: #ff0000
10. Line Color: #000000
11. Print Numbers: No
12. Crosshair: Line Width 0mm

Using the target creator, this target's Bulls Eye is a true 1" and the first ring (10-Ring) is a true 2".

 

[MEAT4272]

Re: Rimefire training aid & targets

A 50 Yard Sight in Target, I use this to check my 50 yard zero after I shoot the 100 yard TQ-4. This way my scope is set and my rifle is ready for the next months TRC 50 yard match.

Mindflow.com's target options:
1. Page Size: Letter (11" X 8.5")
2. Layout: Columns- 1 Rows- 1
3. Calibration Diagram: unchecked
4. BullsEye Size: 5mm
5. Line Width: 0.4mm
6. Space: 6mm
7. #Circles: 5
8. Circles to Fill: 1-Bulls Eye(Middle Only)
9. Fill Color: #ff0000
10. Line Color: #000000
11. Print Numbers: No
12. Crosshair: Line Width 0mm

Using the target creator, this target's Bulls Eye is a true 1/4" and the rings have a true 1/4" spacing.

 

[MEAT4272]

Re: Rimefire training aid & targets

I forgot to mention, these target patterns will create a PDF file that can be saved for future use, and they are all true to their listed size.

 

[D_TROS]

Re: Rimefire training aid & targets

nice. thanks, you saved me from making them myself.

Plan to use a couple of them just for testing diff ammo types im currently doing.

Regards,
DT

 

[spartan67]

Re: Rimefire training aid & targets

This is some good stuff to know!
Thanks guys!!

 

[calebintn]

Re: Rimefire training aid & targets

Nice info

 

[TOP PREDATOR]

Re: Rimefire training aid & targets

this training aid costs $.10

put it on the top of the barrel while dry firing, if it falls off, you are jerking the trigger too much, or not following through smoothly.

if it stays, you are golden.