Rifle Scopes Ring height M1A
- Thread starter dmuldrew
- Start date
Re: Ring height M1A
High to extra-high... depending on (1) range of elevation adjustment on the S&B; and (2) size of the bell on the scope
High to extra-high... depending on (1) range of elevation adjustment on the S&B; and (2) size of the bell on the scope
Re: Ring height M1A
The objective size doesn't mean as much as the eyepiece if you are running iron sights. Low rings will work on most scopes, if the eyepiece has a larger than average diameter then you will need medium.
The objective size doesn't mean as much as the eyepiece if you are running iron sights. Low rings will work on most scopes, if the eyepiece has a larger than average diameter then you will need medium.
Re: Ring height M1A
Ahem, but not all mounts are as low as others.
I'm running a SA Gen III (follow the bloody instructions and it works okay), and the ability of the bell to hang out front and below the mount means a medium (3/8 to 1/2-inch) ring has PLENTY of room above the handguard.
I'd go as low as a cheap set of Weaver rings if I had a line on some...cheap...
ETA: The objective lens is 50 mm.
Ahem, but not all mounts are as low as others.
I'm running a SA Gen III (follow the bloody instructions and it works okay), and the ability of the bell to hang out front and below the mount means a medium (3/8 to 1/2-inch) ring has PLENTY of room above the handguard.
I'd go as low as a cheap set of Weaver rings if I had a line on some...cheap...
ETA: The objective lens is 50 mm.
Similar threads
