I've got a single turn S&B 4-16 that I want to mount on my 7 wsm with 20 moa rail. It's a Stiller tac30 action. Who makes a 34mm ring with roughly 10 moa built in? I looked at the Barrett website, but only saw rings for a 30mm tubed scope.
Rifle Scopes Rings with moa built in for S&B (34 mm tube)?
- Thread starter superde
- Start date
Re: Rings with moa built in for S&B (34 mm tube)?
Mounting Solutions Plus are the only ones I have used, fairly well made.
http://www.mountsplus.com/AR-15_Accessories/AR-15_Scope_Rings/ROP-034-025.html
Another solution would be the AI one piece rings for the picatinny base, available in 18, 28, and 48 MOA. I think either way, your scope is going to be mounted higher than desired.
Kirk R
Mounting Solutions Plus are the only ones I have used, fairly well made.
http://www.mountsplus.com/AR-15_Accessories/AR-15_Scope_Rings/ROP-034-025.html
Another solution would be the AI one piece rings for the picatinny base, available in 18, 28, and 48 MOA. I think either way, your scope is going to be mounted higher than desired.
Kirk R
Re: Rings with moa built in for S&B (34 mm tube)?
Swap your rail out for a Badger 30MOA.
I am pretty sure the Stiller Tac30 is Remington compatible.
Swap your rail out for a Badger 30MOA.
I am pretty sure the Stiller Tac30 is Remington compatible.
Re: Rings with moa built in for S&B (34 mm tube)?
Near Mfg will make you one and it will be a piece of art!
However, I do agree with TB, a new rail will be easier and cheaper.
Near Mfg will make you one and it will be a piece of art!
However, I do agree with TB, a new rail will be easier and cheaper.
Re: Rings with moa built in for S&B (34 mm tube)?
Looking real quick it appears you'll have to talk to Murphy Precision about making you a 30 moa base, probably still the easier way to go.
Looking real quick it appears you'll have to talk to Murphy Precision about making you a 30 moa base, probably still the easier way to go.
Re: Rings with moa built in for S&B (34 mm tube)?
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: superde</div><div class="ubbcode-body">I've got a single turn S&B 4-16 that I want to mount on my 7 wsm with 20 moa rail. It's a Stiller tac30 action. Who makes a 34mm ring with roughly 10 moa built in? I looked at the Barrett website, but only saw rings for a 30mm tubed scope. </div></div>
Or cut a shim and shim the rail to proper height in the rear. Its not hard to do and done right is very reliable. 0.010" would be a good starting place.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: superde</div><div class="ubbcode-body">I've got a single turn S&B 4-16 that I want to mount on my 7 wsm with 20 moa rail. It's a Stiller tac30 action. Who makes a 34mm ring with roughly 10 moa built in? I looked at the Barrett website, but only saw rings for a 30mm tubed scope. </div></div>
Or cut a shim and shim the rail to proper height in the rear. Its not hard to do and done right is very reliable. 0.010" would be a good starting place.
Re: Rings with moa built in for S&B (34 mm tube)?
I manufacture those mounts in 0 and 6mils/20 moa.
Here is a group buy of those right now, please have a look there, as there is a lot of pictures and ideas about it.
http://www.snipershide.com/forum/ubbthreads.php?ubb=showflat&Number=1948635#Post1948635
Håkan
I manufacture those mounts in 0 and 6mils/20 moa.
Here is a group buy of those right now, please have a look there, as there is a lot of pictures and ideas about it.
http://www.snipershide.com/forum/ubbthreads.php?ubb=showflat&Number=1948635#Post1948635
Håkan
Re: Rings with moa built in for S&B (34 mm tube)?
Captain Kirk,
45 moa total may be too much.
Tigerbikes and jasonk,
Thanks, my brain last night was not working correctly - that would be the easy solution if the hole spacing is the same. I'll give Stiller a call today to ask.
Håkan,
I have read the reviews about your mount, and will probably order one for one of my "tactical" rigs. This scope however is going on a lighter weight hunting rifle that I would like to get as low and light as possible.
Captain Kirk,
45 moa total may be too much.
Tigerbikes and jasonk,
Thanks, my brain last night was not working correctly - that would be the easy solution if the hole spacing is the same. I'll give Stiller a call today to ask.
Håkan,
I have read the reviews about your mount, and will probably order one for one of my "tactical" rigs. This scope however is going on a lighter weight hunting rifle that I would like to get as low and light as possible.
Re: Rings with moa built in for S&B (34 mm tube)?
Superde,
If you can get the hole spacing info from Stiller, I can make you a 30 MOA mount in a day or two, then you can use any rings you want. (We also make stainless and titanium 34mm rings)
Just let me know if there is anything I can do for you.
- Cameron
Superde,
If you can get the hole spacing info from Stiller, I can make you a 30 MOA mount in a day or two, then you can use any rings you want. (We also make stainless and titanium 34mm rings)
Just let me know if there is anything I can do for you.
- Cameron
Similar threads
