I'm still in question mode about my Savage Model 12, 22-250 to 6mm Remington conversion.
Will I need to replace the bolt face and ejector?
Thanks
Will I need to replace the bolt face and ejector?
Thanks
Gunsmithing Savage Bolt Head
- Thread starter feelinducky
- Start date
Re: Savage Bolt Head
Nope, It will all work. Just change the barrel. You may have feeding issues out of the box mag, but more than than likely it will work too.
Nope, It will all work. Just change the barrel. You may have feeding issues out of the box mag, but more than than likely it will work too.
Re: Savage Bolt Head
Great thanks for the help!! What will cause the feeding issues? Is there anything to do to mitigate that?
Great thanks for the help!! What will cause the feeding issues? Is there anything to do to mitigate that?
Re: Savage Bolt Head
Skillful polishing and fabricating, but I doubt there will be any problems for you to have to do a great deal to.
Skillful polishing and fabricating, but I doubt there will be any problems for you to have to do a great deal to.
Re: Savage Bolt Head
I was thinking the long neck on the 6mm may cause a minor hickup.
I was thinking the long neck on the 6mm may cause a minor hickup.
Similar threads
Gunsmithing TL2 and Origin Bolt Heads
