Rifle Scopes Scope clearance on Sendero

[jerry1]

I am out of state for a few months and do not have my rifle with me. I have a set of medium Mark 4 rings for a one inch 6.5x20 Leupold scope. I have a Nightforce Picatinny mount with the 20 MOA base. Do you think I can clear a factory Sendero barrel?
Thanks
Jerry

 

[jasonk]

Re: Scope clearance on Sendero

I'd imagine you'll be just fine.

 

[dreamlander]

Re: Scope clearance on Sendero

Should be fine, even with a 50mm objective.

 

[ORD]

Re: Scope clearance on Sendero

I have a similar Leupold (50mm) on one of my Senderos using a Badger 20MOA base and standard rings (0.824...base of ring to centerline of scope) and it is just enough clearance over the barrel.

I can't recall the specific height on the Mk4 Med rings, but if they are 0.82 or higher, you should be fine.

 

[jerry1]

Re: Scope clearance on Sendero

Thanks for the help guys! I am in the Arctic working with Eskimo kids. I am a long way from any roads. You saved me some money.
Sincerely,
Jerry

 

[Ghogs Nightmare]

Re: Scope clearance on Sendero

You'll be fine...I had same scope mount in standard leupy mounts and rings. No prb with space with bc flips installed as well. (This was installed on my Sendero SF)