Rifle Scopes Scoping a springfield

[Ewen]

I have a beautiful Springfield rifle that National Match Armory built for me.

My question is, can I fit a scope without drilling and tapping the receiver?

I can shoot fine with a scope and now want to use the iron sights but don't know the potential of this rifle. I would like to work up an accurate load with a scope then switch to irons.

Ideas?

Ewen

 

[jet_lagged]

Re: Scoping a springfield

If it is an early style 1903, you can replace the ladder sight with a short base to mount a scout style scope.

For 1903 with ladder sight:
http://www.cheaperthandirt.com/SKM1470-34.html

These below say no gunsmithing, so not really sure how they attach. May be other brands out there.

http://www.gunaccessories.com/MilitaryScopeMounts/Springfield/index.asp

 

[BasraBoy]

Re: Scoping a springfield

Ewen, I looked at the NMA 1903's a while back - looks like they do great work. Would be good to see pics and a range report.

How long did it tkae Eric to get it to you?

 

[Joel989]

Re: Scoping a springfield

Well, If you start drilling and tapping and modifying the rifle, the collectability (value) drops dramatically. So, be advised.

 

[ORD]

Re: Scoping a springfield

B-Square and S&K both make no-drill/tap scope mounts for the 1903 and 1903A3 receivers. See here:

http://secure.armorholdings.com/b-square/springfield.html

and here:

http://www.midwayusa.com/viewProduct/?productNumber=739240

I have only seen the B-Square and it is likely adequate for the purpose intended in this situation (stick with a smaller, lighter scope), but I wouldn't trust my life to one. They just aren't as solid as mounts that would require drilling/tapping of the receiver, but they do offer you an option that won't require you to tear up a beautiful '03 receiver.