Rifle Scopes Seekins 6 screw?
- Thread starter LukeUSMC
- Start date
Re: Seekins 6 screw?
If I recall correctly they do not make the 6 screw anymore as there was no need for it. The 4 screw works just fine. But I may be incorrect. Contact Scott at Liberty Optics and ask him, he sells them and would know for sure.
Or just wait for Scott or Heatseekins to post in here.
If I recall correctly they do not make the 6 screw anymore as there was no need for it. The 4 screw works just fine. But I may be incorrect. Contact Scott at Liberty Optics and ask him, he sells them and would know for sure.
Or just wait for Scott or Heatseekins to post in here.
Re: Seekins 6 screw?
http://www.snipershide.com/forum/ubbthreads.php?ubb=showflat&Number=1357938
John
http://www.snipershide.com/forum/ubbthreads.php?ubb=showflat&Number=1357938
John
Re: Seekins 6 screw?
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: LukeUSMC</div><div class="ubbcode-body">You like the seekins? </div></div>
I have the Seekins 4 screw on my 300WM. Scott drove them to my house.
I am very impressed with the quality and strength of these rings. I know BO have a great rep, but I would not hesitate to recommend the Seekins.
John
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: LukeUSMC</div><div class="ubbcode-body">You like the seekins? </div></div>
I have the Seekins 4 screw on my 300WM. Scott drove them to my house.
John
Re: Seekins 6 screw?
If you're set on Seekins' 6-screw, just pick up the phone.
208-791-8741
It's worth the time, especially to talk right to the company owner.
If you're set on Seekins' 6-screw, just pick up the phone.
208-791-8741
It's worth the time, especially to talk right to the company owner.
Re: Seekins 6 screw?
Scott and i were just talking about heights and what to offer this week.
I would like to do 4/6 combo sets so i don't run into the same problems i had before (eye relief issues) Thoughts? Anyone opposed?
Scott and i were just talking about heights and what to offer this week.
I would like to do 4/6 combo sets so i don't run into the same problems i had before (eye relief issues) Thoughts? Anyone opposed?
Re: Seekins 6 screw?
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: heatseekins</div><div class="ubbcode-body">Scott and i were just talking about heights and what to offer this week.
I would like to do 4/6 combo sets so i don't run into the same problems i had before (eye relief issues) Thoughts? Anyone opposed? </div></div>
I think the 4/6 combo is the better set up. Thats what I wanted to go with in the Badger but $225 is waaaaay to much for some rings! I've been hearing good things about the seekins, so if you made some 4/6 I'd buy 2 pair when they come out.
Ring caps would be good too.
-Luke
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: heatseekins</div><div class="ubbcode-body">Scott and i were just talking about heights and what to offer this week.
I would like to do 4/6 combo sets so i don't run into the same problems i had before (eye relief issues) Thoughts? Anyone opposed? </div></div>
I think the 4/6 combo is the better set up. Thats what I wanted to go with in the Badger but $225 is waaaaay to much for some rings! I've been hearing good things about the seekins, so if you made some 4/6 I'd buy 2 pair when they come out.
Ring caps would be good too.
-Luke
Re: Seekins 6 screw?
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: JBW#3</div><div class="ubbcode-body">We have a 8 screw if that will work.
John III
</div></div>
Who makes those battle tanks!?!?!?
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: JBW#3</div><div class="ubbcode-body">We have a 8 screw if that will work.
John III
Who makes those battle tanks!?!?!?
Re: Seekins 6 screw?
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: heatseekins</div><div class="ubbcode-body">Scott and i were just talking about heights and what to offer this week.
I would like to do 4/6 combo sets so i don't run into the same problems i had before (eye relief issues) Thoughts? Anyone opposed? </div></div>
Glen, 4/6 combo will do just fine, just please make sure you have 35mm highs on that list or my USO 5-25 T-Pal is going to be stuck with the crappy TPS rings that I have now.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: heatseekins</div><div class="ubbcode-body">Scott and i were just talking about heights and what to offer this week.
I would like to do 4/6 combo sets so i don't run into the same problems i had before (eye relief issues) Thoughts? Anyone opposed? </div></div>
Glen, 4/6 combo will do just fine, just please make sure you have 35mm highs on that list or my USO 5-25 T-Pal is going to be stuck with the crappy TPS rings that I have now.
Re: Seekins 6 screw?
I'm wanting a set of 34 low 6/4's if you're going to make them. If not I'll be happy with picking up a regular set of low 34's.
I'm wanting a set of 34 low 6/4's if you're going to make them. If not I'll be happy with picking up a regular set of low 34's.
Re: Seekins 6 screw?
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: rundm</div><div class="ubbcode-body">seekins rings are top notch. easily as good as any other high end rings and at very good prices also. </div></div>
I hope we will see. I hoped I would get set #1 of the 6 screw rings to replace the broken rings I sent back in 2007. I have been using the 4 screw rings with out a problem.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: rundm</div><div class="ubbcode-body">seekins rings are top notch. easily as good as any other high end rings and at very good prices also. </div></div>
I hope we will see. I hoped I would get set #1 of the 6 screw rings to replace the broken rings I sent back in 2007. I have been using the 4 screw rings with out a problem.
Similar threads
