Accessories Selling QD Clutches, Plates, and Grips!

[KhaymKhaym]

Hey guys I am selling some clutches that I have designed and 3D printed in carbon fiber. They have steel retention screws and a steel QD stud but the body is in Carbon Fiber to cut the cost down so that I can bring these to you guys for $35 + the ride (average shipping cost is 5-6$). I know a lot of us have multiple rifles or friends that want one so if you buy two I will take 10$ off the cost making them 30$/ea!

We also have a ton of other products and I am partnered with the creator of the super trickle funnel kits so his products are for sale on our website as well!

www.hk3dprinting.com

We are only a few days old at this point and the goal is to bring PRS competitors and avid shooters of our sport products at an affordable price. This sport is already incredibly expensive to partake in so any way we can help out, we want to.

 

[billditt]

What are these used for?

 

[KhaymKhaym]

What are these used for?

To clamp into a QD slot on your rifles forend to apply pressure to the front of the rifle when shooting positionally

 

[KhaymKhaym]

To give a visual, note this was a concept version. But this style can still be made if anyone wants Finger flats rather than a round.

 

[Savage_308win]

Where were these Saturday?! I just ordered on from manners!

 

[megafans]

What type of material is used for the super trickler items and are the available in another color?

 

[KhaymKhaym]

What type of material is used for the super trickler items and are the available in another color?

Other colors could potentially be specially ordered. They are printed from PLA and PLA+ since they are things that are not fielded they don't need the super high temp resistance. PLA is also still one of the strongest plastics out there.

 

[Huskydriver]

Do yours rotate easily once attached?

 

[KhaymKhaym]

Do yours rotate easily once attached?

They will rotate if you take pressure off of them just like any other QD attachment would since its on ball bearings. With that said, any pressure down, up, side to side, will kept it from rotating so when your on a barricade and pressing down on it she won't move at all. Have tested it quite in depth myself. With that said, that's why I went to a rounded design rather than the thumb flats as it will rotate between positions even if slightly and it became very annoying to find the flats.

 

[thesoupnazi]

Nice idea, I'll PM you for an order. Is a small QD socket pic rail section an option with your tooling?

 

[KhaymKhaym]

Nice idea, I'll PM you for an order. Is a small QD socket pic rail section an option with your tooling?

I don't currently have one designed but that may be something we could do in the future. Certainly could play with them and see about printing one in PEEK or Poly Carbonate

 

[KhaymKhaym]

2 more left in my inventory for immediate shipment! Will be able to get more together and out to you lovely folks by Friday!

 

[KhaymKhaym]

Got the parts in! Will have another batch of clutches ready for immediate shipment tonight!

 

[KhaymKhaym]

Got some fresh bag plates coming off the press and have a couple dozen clutches made and ready to ship!

Also have a design I did for myself that I'm curious if anyone would be interested in. It is a QD attachable MLOK rail, could also be fitted with a Pic rail. Is this something that you lovely folks would need or be interested in?

 

[KhaymKhaym]

If anyone is going to be at Clinton House on 08/05/2023 or Gunline for Magnolia Meltdown 08/19/2023 I will be bringing some clutches, pic rails, bag plates, and other assorted parts to sell at those matches as well!

 

[KhaymKhaym]

Moving forward all of the clutches will be printed in carbon fiber nylon for triple the strength!!

 

[KhaymKhaym]

New V2 Clutch design will be what will ship moving forward. Also if someone wants to upgrade and has made a purchase prior to today, upgrading is only 10$. Any warrantied clutches moving forward will be this new design. As it is FAR stronger and has been stress tested intensively including running it over with my car.

 

[BoulderE89]

PMed

 

[KhaymKhaym]

New part folks. This one is curved and angled for your pleasure. If you don't have QD but do have a flat MLOK surface. Your gonna love this for

 

[JoeyAtch]

Anyone want to provide a review for these clutches?

 

[KhaymKhaym]

More clutches available! Recently tested at magnolia meltdown in 110 degree heat! Also more products available on the website!

www.hk3dprinting.com

 

[KhaymKhaym]

Fresh batch of clutches ready to go out!

 

[awatson411]

Anyone want to provide a review for these clutches?

Good to go. So far seem to be durable and hold up. I have one from him and will order more for other rifles eventually.

 

[ntrinsik]

New part folks. This one is curved and angled for your pleasure. If you don't have QD but do have a flat MLOK surface. Your gonna love this for

Any photos of this on a rifle?

 

[KhaymKhaym]

Any photos of this on a rifle?

Not at this point, just sent one out for an ACC chassis so will have those soon. It is too tall to fit on a matrix pro. Can get pics of it on a regular matrix this afternoon.

 

[KhaymKhaym]

QD Clutch | Hkmachine

This clutch is printed from Carbon Fiber material and is combined with a steel QD swivel stuff that is threaded and bound to the clutch using two M6 set screws that thread direct into the QD swivel stud. This allows you to get a solid firm purchase on the clutch and keep your rifle where it...

www.hk3dprinting.com

Clutches are back in stock and ready to roll!

 

[Kadams1563]

Tagging these for later. I have been searching for them for my foundations BUT I don’t know if my arms reach that far. Will need to set up on the barricade and see how I think it would work.

 

[KhaymKhaym]

Tagging these for later. I have been searching for them for my foundations BUT I don’t know if my arms reach that far. Will need to set up on the barricade and see how I think it would work.

So I have used them on a foundation and a few buddies use them on foundations. It depends on the position that you are in. Standing it's super easy to get out there and kneeling I have no trouble getting out there and I'm pretty average height at 5'10". Some stages put you in an awkward position and makes it harder to get out there.

 

[KhaymKhaym]

Here's a pic of one on a foundation

 

[Pocket]

More clutches available! Recently tested at magnolia meltdown in 110 degree heat! Also more products available on the website!

www.hk3dprinting.com

It was only 109°
Well at the stage I was RO’ing anyway lol

 

[KhaymKhaym]

Still have plenty available!

 

[KhaymKhaym]

All current orders will be going out today! More still available!

 

[KhaymKhaym]

Promo Code for Labor Day, LaborDay23 for free shipping!

QD Clutch | Hkmachine

This clutch is printed from Carbon Fiber material and is combined with a steel QD swivel stuff that is threaded and bound to the clutch using two M6 set screws that thread direct into the QD swivel stud. This allows you to get a solid firm purchase on the clutch and keep your rifle where it...

www.hk3dprinting.com

 

[KhaymKhaym]

One more day left on the sale folks!

 

[KhaymKhaym]

Clutches back in stock!



www.hk3dprinting.com

 

[N_S]

I got my clutch in and had to add a short picatinny rail to my XRS stock to get the position I wanted. So far it feels great. Thank you again for everything

 

[KhaymKhaym]

More and more clutches are ready to go!

 

[KhaymKhaym]

Clutches in stock at www.hk3dprinting.com, also have arca plates ready and everything else!

 

[RedDawn]

Received my clutch yesterday .. thanks !

 

[KhaymKhaym]

Clutches are back in and so are the dope card holders and arca plates

 

[bbyars]

Still have these available?

 

[KhaymKhaym]

Still have these available?

Always!

 

[bbyars]

Just ordered 3x and an Arca pic rail conversion. Cant wait to try them out!

 

[H&H Precision Outdoors]

@KhaymKhaym Good evening sir!

Was interested in the Super-Trickler Super Kit you offer on your website. Do you have these in-stock?