Short 300 Blackout Question

[Here2Learn]

I'm Thinking about building a short (8.5-9) suppressed 300 Blackout. Match accuracy is not a huge issue since it will be such a short barrel. Are there any decently priced short barrels for the 300 blackout or are AAC and Noveske the only ones out there?

 

[rsilvers]

Re: Short 300 Blackout Question

List of barrel makers in this FAQ:

http://www.300blktalk.com/forum/viewtopic.php?f=128&t=73274

 

[GlockandRoll]

Re: Short 300 Blackout Question

Robert, does anyone make an extended length FF tube so you can install the suppressor under it and avoid SBR tax?

 

[springer01]

Re: Short 300 Blackout Question

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: GlockandRoll</div><div class="ubbcode-body">Robert, does anyone make an extended length FF tube so you can install the suppressor under it and avoid SBR tax?

</div></div>

Are you talking about permanently attaching the suppressor to barrel? Otherwise you would still have and SBR whether it was under a FF tube or not.

 

[Here2Learn]

Re: Short 300 Blackout Question

Thanks for the info silvers

 

[ddavis]

Re: Short 300 Blackout Question

I believe what he is thinking of is a shroud that covers the suppressor and keeps the length at greater than 16". You can't have a 16" handguard and call it good, it must be permanently attached to the barrel. I've seen pictures of what is essentially a hollow tube with an inside diameter just bigger than the suppressor permanently attached, i.e. a 6" hollow tube attached to a 10" barrel, bringing the length to 16". I don't know of any manufactures making something like that though, I believe it would be a custom proposition.

 

[ddavis]

Re: Short 300 Blackout Question

Did some searching, and found that Tacictal Solutions does something like this for a 10/22:

http://www.tacticalsol.com/tshome/catego...barrel-upgrades