Where can I find(the easy way) the dope for a 308 (175gr blackhills) 20 inch barrel.5,10,15,25yds,etc.
Range Report short distance dope
- Thread starter prbulldog
- Start date
Re: short distance dope
its not gonna match perfectly but "Google" JBM Ballistics
its not gonna match perfectly but "Google" JBM Ballistics
Re: short distance dope
Make sure your scope height is as close as possible when getting this data. I have a specific data sheet I carry with each rifle with my others that goes from 1-20 yards. Doesn't matter what ammo I use at those ranges as it has more to do with scope height. I run the numbers on JBM and they work.
There's another thread on sight/scope height in the optics section right now.
Make sure your scope height is as close as possible when getting this data. I have a specific data sheet I carry with each rifle with my others that goes from 1-20 yards. Doesn't matter what ammo I use at those ranges as it has more to do with scope height. I run the numbers on JBM and they work.
There's another thread on sight/scope height in the optics section right now.
Re: short distance dope
Shoot it.
However for practical purposes from 50-100 it doesn't vary much at all.
I have a table in Ballistic FTE that is broken down by 5 yard increments for close range KYL type stages. For real life type stuff I just know that under 50 yards I need to favor high for a t-box shot.
We do a lot of close range work with the M4's so it gets to be second nature.
Shoot it.
However for practical purposes from 50-100 it doesn't vary much at all.
I have a table in Ballistic FTE that is broken down by 5 yard increments for close range KYL type stages. For real life type stuff I just know that under 50 yards I need to favor high for a t-box shot.
We do a lot of close range work with the M4's so it gets to be second nature.
Re: short distance dope
This is a Canadian Bull. It was used to zero M14s and M16s. Set it out at 25 meters, aim at the bull and the impact (for the M14 should hit the bottom X. That will give you a 250 meter zero. Aim and the bull, hit the bull and you are zeroed for 25 Meters.
I think if you sight your gun in for 25 meters, you can pretty much hit anying from 5-25 meters. Same Same, sight it in for 250 meters you will be pretty close between 5 & 25 meters.
This is a Canadian Bull. It was used to zero M14s and M16s. Set it out at 25 meters, aim at the bull and the impact (for the M14 should hit the bottom X. That will give you a 250 meter zero. Aim and the bull, hit the bull and you are zeroed for 25 Meters.
I think if you sight your gun in for 25 meters, you can pretty much hit anying from 5-25 meters. Same Same, sight it in for 250 meters you will be pretty close between 5 & 25 meters.
Re: short distance dope
Dist MOA Up
0005 -027.5
0010 -011.9
0015 -006.8
0020 -004.3
0025 -002.9
0030 -002.0
0035 -001.3
0040 -000.9
0045 -000.6
0050 -000.3
0055 -000.2
0060 -000.1
0065 000.0
0070 000.1
0075 000.1
0080 000.1
0085 000.1
0090 000.1
0095 000.0
0100 000.0
This is what I came up with from a program 175grain @ 2700 FPS 1.8" Scope Height. Depending on your numbers that may change a little.
Hope it helps!
Dist MOA Up
0005 -027.5
0010 -011.9
0015 -006.8
0020 -004.3
0025 -002.9
0030 -002.0
0035 -001.3
0040 -000.9
0045 -000.6
0050 -000.3
0055 -000.2
0060 -000.1
0065 000.0
0070 000.1
0075 000.1
0080 000.1
0085 000.1
0090 000.1
0095 000.0
0100 000.0
This is what I came up with from a program 175grain @ 2700 FPS 1.8" Scope Height. Depending on your numbers that may change a little.
Hope it helps!
Re: short distance dope
http://www.dop3.com
It goes down to 1-yard increments, but like others said make sure your scope height data is as close to reality as possible and that your zero is dead nutz.
http://www.dop3.com
It goes down to 1-yard increments, but like others said make sure your scope height data is as close to reality as possible and that your zero is dead nutz.
Re: short distance dope
whats up bottles! Rob is right on the money with scope height. scope height is key for this one be sure to carefully measure from the center of scope to center of barrel/chamber if you want those ballistic programs to work for close dope. you making the bash this year?
zjones... its a competition shot, usually a 1" dot at 5 or 10 yds. i guess it used to trip people up in the past but it seems everyone nails this one now.
charlie (pr1&2)
whats up bottles! Rob is right on the money with scope height. scope height is key for this one be sure to carefully measure from the center of scope to center of barrel/chamber if you want those ballistic programs to work for close dope. you making the bash this year?
zjones... its a competition shot, usually a 1" dot at 5 or 10 yds. i guess it used to trip people up in the past but it seems everyone nails this one now.
charlie (pr1&2)
Re: short distance dope
we shoot a stage like this at Reade every year, off a ladder, down the burm, maybe 10-15 yards. I use my 600 yard dope, and am usually pretty close (shooting a 1" paster).
we shoot a stage like this at Reade every year, off a ladder, down the burm, maybe 10-15 yards. I use my 600 yard dope, and am usually pretty close (shooting a 1" paster).
Similar threads
