Rifle Scopes Sig Sauer W5 Mrad Milling Hunter
- Thread starter 300_BLK
- Start date
That still doesn't work for the vertical, the 10 is in the wrong spot....
All I'm saying is that this reticle is not intuitive like it should be... I think Sig got this very wrong.
There was some WTFing about that awhile back too, nothing came of it though other than noting how screwed up and nonsensical the reticle is. https://www.snipershide.com/shooting/threads/perfect-ar-scope.6967261/#post-8049692
On the horizontal, if the labeled 5 mil mark is out on the end then that means they are 1/2 mil dashes with a larger dash at the 2.5 mil value.
On the elevation, its all fucked up. If its a 1/2 value as one would assume based on the windage then it is labeled way wrong. The 5 would actually be 2.5 mils and the 10 would actually be 7.5 mils.
If they are actually 1 mil holds then the 10 as labeled would actually be 15 mils.
Nothing about the reticle makes sense when you sit down and look at it.
Edit: I can find that they offer a MRAD milling reticle SKU on the website still but I cant find any pictures of the reticle though. Elsewhere its either the fucked up one (optics planet) of they have the moa reticle shown instead (eurooptic)
MOA version looks fine with 2 moa dashes
On the horizontal, if the labeled 5 mil mark is out on the end then that means they are 1/2 mil dashes with a larger dash at the 2.5 mil value.
On the elevation, its all fucked up. If its a 1/2 value as one would assume based on the windage then it is labeled way wrong. The 5 would actually be 2.5 mils and the 10 would actually be 7.5 mils.
If they are actually 1 mil holds then the 10 as labeled would actually be 15 mils.
Nothing about the reticle makes sense when you sit down and look at it.
Edit: I can find that they offer a MRAD milling reticle SKU on the website still but I cant find any pictures of the reticle though. Elsewhere its either the fucked up one (optics planet) of they have the moa reticle shown instead (eurooptic)
MOA version looks fine with 2 moa dashes
Last edited:
So it's not just me!
Thank F*ck for that.
1 Mil holds make little sense, I would expect smaller hashes at the half mil's and larger ones on whole numbers like every other manufacturer.
I used the MOA milling hunter for years and it is great but i'm switching to Mrad and asked Sig to do this a while back to which they replied "we are working on it".
Late last year the agent here (NZ) told me that they were on there way and I immediately searched for a drawing to be rewarded with the above....
Thank F*ck for that.
1 Mil holds make little sense, I would expect smaller hashes at the half mil's and larger ones on whole numbers like every other manufacturer.
I used the MOA milling hunter for years and it is great but i'm switching to Mrad and asked Sig to do this a while back to which they replied "we are working on it".
Late last year the agent here (NZ) told me that they were on there way and I immediately searched for a drawing to be rewarded with the above....
Similar threads
Rifle Scopes
Newbie needs advice on scope for Cross STX 6.5CM
