I have a tacmod chassis and I want to run a sling but can't figure out what kind. The front has picatinney rails so attachment there is no biggie but I'm not sure how to attach a sling back on the butt stock. I've always ran AICS and used hk style hooks before this. Any suggestions?
- Thread starter Daps!
- Start date
Re: Sling Options for Tacmod chassis?
Good question. I searched around and couldn't come up with a single picture of the chassis with a sling attached. The write up on the Tacmod website says its compatible with all sling system. Maybe give them a call and ask how to attach a sling to the buttstock end.
Good question. I searched around and couldn't come up with a single picture of the chassis with a sling attached. The write up on the Tacmod website says its compatible with all sling system. Maybe give them a call and ask how to attach a sling to the buttstock end.
Re: Sling Options for Tacmod chassis?
You can attach a picatinny rail section to any part of the forend and then attach a push button swivel (ie Daniel Defense Rail Mount QD). You then can attach a quick detachable push button swivel (Grovtec etc) to the hole located at the back of the chassis where the hinge of the stock folds. There is a hole for this on both the left and right side. The row of holes on the bottom of the rear folding portion of the stock will accept a push button swivel sling.
You can attach a picatinny rail section to any part of the forend and then attach a push button swivel (ie Daniel Defense Rail Mount QD). You then can attach a quick detachable push button swivel (Grovtec etc) to the hole located at the back of the chassis where the hinge of the stock folds. There is a hole for this on both the left and right side. The row of holes on the bottom of the rear folding portion of the stock will accept a push button swivel sling.
Re: Sling Options for Tacmod chassis?
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: dagger</div><div class="ubbcode-body">You can attach a picatinny rail section to any part of the forend and then attach a push button swivel (ie Daniel Defense Rail Mount QD). You then can attach a quick detachable push button swivel (Grovtec etc) to the hole located at the back of the chassis where the hinge of the stock folds. There is a hole for this on both the left and right side. The row of holes on the bottom of the rear folding portion of the stock will accept a push button swivel sling. </div></div>
+1
I run the DD QD on mine, works like a champ.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: dagger</div><div class="ubbcode-body">You can attach a picatinny rail section to any part of the forend and then attach a push button swivel (ie Daniel Defense Rail Mount QD). You then can attach a quick detachable push button swivel (Grovtec etc) to the hole located at the back of the chassis where the hinge of the stock folds. There is a hole for this on both the left and right side. The row of holes on the bottom of the rear folding portion of the stock will accept a push button swivel sling. </div></div>
+1
I run the DD QD on mine, works like a champ.
Re: Sling Options for Tacmod chassis?
Where did you get your Tacmod?
Where did you get your Tacmod?
Re: Sling Options for Tacmod chassis?
You can get rail adapters for AI type hooks, Flush Cup Swivels or standard QD stud swivels. Triad Tactical carries them all.
On my ARs I run a Hook up front and a Flush Cup at rear of Receiver so I can un snap from front and turn sling into single point type for vehicle use by snapping into side of flush cup
On yours I would run a Flush Cup on front
You can get rail adapters for AI type hooks, Flush Cup Swivels or standard QD stud swivels. Triad Tactical carries them all.
On my ARs I run a Hook up front and a Flush Cup at rear of Receiver so I can un snap from front and turn sling into single point type for vehicle use by snapping into side of flush cup
On yours I would run a Flush Cup on front
Re: Sling Options for Tacmod chassis?
Yep, there are machined-in QD cups right in front of the stock hinge AND on the bottom of the buttstock, right where it would ride a rear bag. Add a qd cup to the forend using a VTac backplate or a pic rail mount and you are good to go.
Yep, there are machined-in QD cups right in front of the stock hinge AND on the bottom of the buttstock, right where it would ride a rear bag. Add a qd cup to the forend using a VTac backplate or a pic rail mount and you are good to go.
Re: Sling Options for Tacmod chassis?
I put a Magpul PRS on my Tacmod........solved all of my issues.
I put a Magpul PRS on my Tacmod........solved all of my issues.
Re: Sling Options for Tacmod chassis?
call tab gear you will love their slings
call tab gear you will love their slings
