Gunsmithing Smith with .243 LBC reamer.
- Thread starter RonA
- Start date
Just curious, does this offer substantial improvement over the 6mm ARC?
The ARC has the advantage of being a SAAMI cartridge, though supply is limited, it is a factory production cartridge.
They are both 6mm's based on the 6.5 grendel/.220 Russian case.
I have a 6mm predator, that is the same as the 243lbc/6 Grendel/whatever else.
There is a tiny bit more case capacity vs the ARC, so there's that, but not a huge increase in performance. If you're into reloading, you might as well get the little extra. The factory support is nice though if you can't/won't reload.
There is a tiny bit more case capacity vs the ARC, so there's that, but not a huge increase in performance. If you're into reloading, you might as well get the little extra. The factory support is nice though if you can't/won't reload.
Bolt gun with a 10 twist and bullets 75gr or so. Velocity will be a good thing. I reload so
the ARC doesn't interest me in the slightest.
the ARC doesn't interest me in the slightest.
Similar threads
Gunsmithing
Any smiths with a 20BRA reamer?
