I'm going to be lengthy because I like being transparent. Please read the whole thing if your going to buy it as a "ready to shoot" rifle. If you just care about everything besides the barrel, your good to go, everything else is tits.
Sorry but you'll need some feedback in order to purchase. Im looking for a smooth transaction, works been screwed and I don't have much time to dick around.
$2200 shipped, indv to your FFL, you pay insurance. Read about the barrel before saying I'll take it.
First public I'll take it gets it. PayPal friends and family only. Your FFL must accept from individuals.
Everything has just under 1600 rounds besides the chassis.
-Impact 737R Standard Bolt Face, had velcro behind ejection port since it was purchased so there's no "dings" back there.
-TT Diamond Curved (not pro curved , it has ridges and isn't the big flat curved one)
-6.5CM 26" Proof comp contour (prefit) installed by altus, 1568 rounds. It may be shooter, but something doesn't seem right with it, (shot out? ) I had a carbon ring develope at the 1100 round mark and I "cleaned" it out... Hasn't shot right since, pretty sure I messed it up but maybe I'm a dumbass that can't shoot. It's factored in the price to buy a prefit.
I have a borescope, I can take video's and pictures upon request. But it will be sometime after tomorrow morning (Tuesday 9/14)
-Area419 Hellfire Brake
-MPA BA chassis, gunmetal, mid 2019 model purchased from eurooptic in April 2020. (inclinometer not bubble level, but no adjustable mag catch like the 2020 models)
This action has never been fired while in this new chassis. I'm assuming everything will work fine as before it was in the same exact model but just a different color.
This chassis was on my 223 trainer for approx 900 rounds , never seen a match. It is in extremely good condition, no magwell wear, only some slight wear from clipping in and out of tripod.
*Protip, this is a left hand ambi chassis. Once I removed the left side thumb rest there is zero difference between this and a right hand ambi. It still has the right side thumbself and everything else that's on my right hand ambi. Left hand BA chassis's go on sale all the time. Look for the right side bolt knob cut out and your saving 300$+
There will be no rear bag rider, no tripod.
I have a NV bridge that has sand paper glued on it, and you can have your choice of either the sawtooth extended arca spigot (badass) or a v2 spigot (arca and pic).
I am willing to trade for primers or 9mm ammo. If it was me, Id buy a new barrel. 41.5 h4350/140eldm was shooting .4's prior to the ring, since then it's at 1 or just under. Balance point with atacr is just in front of magwell (seen in last picture without scope)
Obviously I don't know what the fuck I'm doing with a borescope. They're the only two pics that transfered to my phone and I'm already at work.
Sorry but you'll need some feedback in order to purchase. Im looking for a smooth transaction, works been screwed and I don't have much time to dick around.
$2200 shipped, indv to your FFL, you pay insurance. Read about the barrel before saying I'll take it.
First public I'll take it gets it. PayPal friends and family only. Your FFL must accept from individuals.
Everything has just under 1600 rounds besides the chassis.
-Impact 737R Standard Bolt Face, had velcro behind ejection port since it was purchased so there's no "dings" back there.
-TT Diamond Curved (not pro curved , it has ridges and isn't the big flat curved one)
-6.5CM 26" Proof comp contour (prefit) installed by altus, 1568 rounds. It may be shooter, but something doesn't seem right with it, (shot out? ) I had a carbon ring develope at the 1100 round mark and I "cleaned" it out... Hasn't shot right since, pretty sure I messed it up but maybe I'm a dumbass that can't shoot. It's factored in the price to buy a prefit.
I have a borescope, I can take video's and pictures upon request. But it will be sometime after tomorrow morning (Tuesday 9/14)
-Area419 Hellfire Brake
-MPA BA chassis, gunmetal, mid 2019 model purchased from eurooptic in April 2020. (inclinometer not bubble level, but no adjustable mag catch like the 2020 models)
This action has never been fired while in this new chassis. I'm assuming everything will work fine as before it was in the same exact model but just a different color.
This chassis was on my 223 trainer for approx 900 rounds , never seen a match. It is in extremely good condition, no magwell wear, only some slight wear from clipping in and out of tripod.
*Protip, this is a left hand ambi chassis. Once I removed the left side thumb rest there is zero difference between this and a right hand ambi. It still has the right side thumbself and everything else that's on my right hand ambi. Left hand BA chassis's go on sale all the time. Look for the right side bolt knob cut out and your saving 300$+
There will be no rear bag rider, no tripod.
I have a NV bridge that has sand paper glued on it, and you can have your choice of either the sawtooth extended arca spigot (badass) or a v2 spigot (arca and pic).
I am willing to trade for primers or 9mm ammo. If it was me, Id buy a new barrel. 41.5 h4350/140eldm was shooting .4's prior to the ring, since then it's at 1 or just under. Balance point with atacr is just in front of magwell (seen in last picture without scope)
Obviously I don't know what the fuck I'm doing with a borescope. They're the only two pics that transfered to my phone and I'm already at work.
