I have 2 lots of 6x47 Lapua brass I'd like to sell.
#1 - $225 shipped - Approximately 380 (+ or - 2 or 3) once fired as 6.5x47 Lapua then necked down with Whidden full length 6x47 sizing die and run across .2425 mandrel. These have also been annealed prior to mandrel and will be trimmed to length, chamfered and deburred.
#2 - $250 shipped - 530 once fired as 6.5x47 Lapua then necks turned to .0125 with K&M Neck Turner, necked down with Whidden full length 6x47 sizing die and run across .2425 mandrel. Then fired as 6x47 Lapua, annealed, cleaned, FL sized, trimmed to length, run across .2425 mandrel, chamfered and deburred.
#1 - $225 shipped - Approximately 380 (+ or - 2 or 3) once fired as 6.5x47 Lapua then necked down with Whidden full length 6x47 sizing die and run across .2425 mandrel. These have also been annealed prior to mandrel and will be trimmed to length, chamfered and deburred.
#2 - $250 shipped - 530 once fired as 6.5x47 Lapua then necks turned to .0125 with K&M Neck Turner, necked down with Whidden full length 6x47 sizing die and run across .2425 mandrel. Then fired as 6x47 Lapua, annealed, cleaned, FL sized, trimmed to length, run across .2425 mandrel, chamfered and deburred.
Last edited: