Spuhr 4001 on CZ457 LRP Problem?

[walkabout]

Does anybody run a Spuhr 4001 34mm mount on a CZ457?
I am worried that with the design of a one piece mount the empty cases my not clear on ejection and bounce back in the action?
Cheers

 

[TF626]

i don’t think you’ll have an ejection problem but it looks like the Spuhr won’t work due to the 2x central lugs. The LRP base doesn’t have slots above the ejection port which caused me to switch out to an older Cadex mount that has a removable center lug that will work with my CZ. FWIW I’ve had no issues with ejection over 150-250 rounds fired.

 

[Rob01]

You can put a 20 moa base on the rifle and it’s all one piece so you can use any mount on it.

HD CZ 457 Picatinny Rail Mount 20 MOA

Save 10% on a set of Keystone Rings with this rail and get free 2-Day shipping!*Mounting Hardware is IncludedThis mount fits:CZ 457Our CZ 452 mount will also fit the 457, but it will not completely cover the receiver as shown in the product image.*The Keystone Ring Combo discount is only...

www.egwguns.com

That said any reason you want to spend over $400 on a mount for that rifle? Plenty of other mounts will work as well and will be less expensive.

 

[walkabout]

I have a spare 4001 So I thought I might use it.
I didn't want to strip down the rifle and have to re-zero if it didn't work.
I hadn't thought about the recoil lug on the mount?

 

[Rob01]

Do you have a base on it now?

 

[walkabout]

Do you have a base on it now?

Yes its the CZ 20moa base, I have a mill so could cut in a slot for the mount recoil lug.
I might just leave the 2 piece rings, cant really see what I will be gaining?

 

[TF626]

Yes its the CZ 20moa base, I have a mill so could cut in a slot for the mount recoil lug.
I might just leave the 2 piece rings, cant really see what I will be gaining?

Weight ;-)