• Watch Out for Scammers!

    We've now added a color code for all accounts. Orange accounts are new members, Blue are full members, and Green are Supporters. If you get a message about a sale from an orange account, make sure you pay attention before sending any money!

Spuhr SP-4602 Discontinued

SpeedDrop

Supporter
Supporter
Minuteman
Jan 23, 2019
67
88
TX
Have spoken to Mile High and EO and it seems this mount is discontinued. Only comparable model seems to be the SP-4602c with a smaller back ring. Four screws compared to six.

Diameter: 34mm
Height: 38mm/1.5”
Cant: 20.6 MOA/6Mil


Has anyone used the 4602c or similar Spuhr mount with the smaller back ring and noticed any issues with larger calibers (e.g. 300 NM, 338 NM, 338 LM, etc.)?
 
Have spoken to Mile High and EO and it seems this mount is discontinued. Only comparable model seems to be the SP-4602c with a smaller back ring. Four screws compared to six.

Diameter: 34mm
Height: 38mm/1.5”
Cant: 20.6 MOA/6Mil


Has anyone used the 4602c or similar Spuhr mount with the smaller back ring and noticed any issues with larger calibers (e.g. 300 NM, 338 NM, 338 LM, etc.)?
I run basic Mark 4 rings with only 4 screws on my 300 WM. No issues. This being a full mount should not have any issues whatsoever. I think this is the new design for the Gen 3 mounts. Its what I see them labeled as with all retailers that carry them.
 
  • Like
Reactions: SpeedDrop
I also saw the 4616 is discontinued. Same mount still available but only in Quick disconnect. Kinda dumb
 
Been running the C versions on a few guns for a while. Don't notice a difference. I turn the smaller cap around so it doesn't extend back on the scope. Just purely a looks thing but these new mounts work just as well.
 

Attachments

  • 20230205_091545.jpg
    20230205_091545.jpg
    339.9 KB · Views: 193
  • Like
Reactions: SpeedDrop
Have spoken to Mile High and EO and it seems this mount is discontinued. Only comparable model seems to be the SP-4602c with a smaller back ring. Four screws compared to six.

Diameter: 34mm
Height: 38mm/1.5”
Cant: 20.6 MOA/6Mil


Has anyone used the 4602c or similar Spuhr mount with the smaller back ring and noticed any issues with larger calibers (e.g. 300 NM, 338 NM, 338 LM, etc.)?
Yes mine had a hairline Crack across the bar from a 300 norma magnum. Ran fine with everything else.
 

Attachments

  • 20230311_143410.jpg
    20230311_143410.jpg
    503.9 KB · Views: 151
  • Like
Reactions: SpeedDrop