Suggestions For AR-22 Upper Build Parts

WeR0206

Gunny Sergeant
Full Member
Minuteman
Feb 23, 2024
866
781
Northern Cal
www.youtube.com
My next upper build is going to be one chambered in 22 LR. Since this is kind of a different part ecosystem than the centerfire world (that I'm more familiar with) I was curious about which barrels, bolt groups, mags, etc. people would recommend.

Budget for the build is <$400

Here are the parts I'm considering, any feedback would be much appreciated.
 
  • Like
Reactions: flogxal
I have a .22LR 16" that I built with an RTB Pencil barrel, might be the same one BoreBuddy sells. I used a CMMG bolt which I'd tried as a 5.56 conversion bolt, and just bought the dedicated collar when I got the .22LR barrel. The upper reciever is a RTB basic one made for PCC/rimfire.

I use a Bore Buddy plug at the buffer tube.

Black Dog mags are all I use and I have a fair number of them.

I've used this rifle in Steel Challenge and in Appleseed shoots, just swapping optics. It's a nice shooter for a cheap barrel rimfire rifle. I've never had malfunctions. I keep the bolt slightly wet with Mobil 5w-30 on the slide rails/springs.

The barrel does fine with Norma Tac-22, Wolf Gold, Eley Club.
 
  • Like
Reactions: WeR0206
I have a .22LR 16" that I built with an RTB Pencil barrel, might be the same one BoreBuddy sells. I used a CMMG bolt which I'd tried as a 5.56 conversion bolt, and just bought the dedicated collar when I got the .22LR barrel. The upper reciever is a RTB basic one made for PCC/rimfire.

I use a Bore Buddy plug at the buffer tube.

Black Dog mags are all I use and I have a fair number of them.

I've used this rifle in Steel Challenge and in Appleseed shoots, just swapping optics. It's a nice shooter for a cheap barrel rimfire rifle. I've never had malfunctions. I keep the bolt slightly wet with Mobil 5w-30 on the slide rails/springs.

The barrel does fine with Norma Tac-22, Wolf Gold, Eley Club.
Thanks for the input!! People seem to really like the Black Dog mags