Super 6 Action feeding problems

[jinxx4ever]

i know there's a thread on these actions, but when i search it and try to go to the page, it won't load for me, so here goes. Received my action and bartlein barrel back from LRI a couple weeks ago. Dropped into a MPA chassis.
I had my barrel chambered for Norma brass. Loaded some up to break in the barrel and it doesn't feed worth a damn. Order the BR mags directly from John to go with the action. Has anyone else had this problem? Do the mag feed lips need some modification done to them? Also , how do ur actions run, mine seems very rough and the bolt lift heavy . Not even close to my impact i'm used to running. Help appreciated. Thanks

 

[_Raining]

I don't have a super short 6 but I have had mag feeding problems with my rifles and people will be better suited to help you if you provide more detail or better yet pictures. Is it hitting the feed lips or back of the mag with upward pressure, sliding over the rounds, bullet tips getting caught under the feed ramp, bullets tipping down in the mag, bullet tips hitting the breach face etc.

 

[jinxx4ever]

I don't have a super short 6 but I have had mag feeding problems with my rifles and people will be better suited to help you if you provide more detail or better yet pictures. Is it hitting the feed lips or back of the mag with upward pressure, sliding over the rounds, bullet tips getting caught under the feed ramp, bullets tipping down in the mag, bullet tips hitting the breach face etc.

thanks, the bullet tips seem to be hitting the breech face. I'll try to get some pics tomorrow and post. Thanks for the reply and what to post.

 

[b6graham]

more times than not this is a mag issue. feed lip angles being primary culprit