TAB sling attatchment method?

[Møønlight]

I don't know which attatchment method I need under the hardware option.

I have a badger rail on the bottom front and a sling stud on the back.

If anyone can help out, that would be great.
Many thanks,
-Ms

 

[tmanners]

Re: TAB sling attatchment method?

If the badger rail has a cup, you can always run a stud adapter in that cup, that will give you a stud in the front and one in the rear for a standard type sling. To run the tab, you will need to install a rear cup. Thanks

 

[Møønlight]

Re: TAB sling attatchment method?

I stil don't understand. My apologies.
This is what I have:



Thanks for the help,
-Ms

 

[Tburkes]

Re: TAB sling attatchment method?

Moonshadow, you're going to want to order your sling with the HD Swivels at both the front and the back.

I assume you're running the Badger rail so you can attach an Atlas bipod. The small hole in the rear of the rail is for a HD Swivel to attach to, just like the stud in the stock behind it.

You only have one type of sling attachment method at the front, for the HD Swivel, but two places you can attach the sling.

If that doesn't clear it up for you I'll try to explain further.

Thank you for considering our products.

 

[Møønlight]

Re: TAB sling attatchment method?

That clears things up perfectly!

Thank you very much.
-Ms