TL3 and mini chassis

[Awesymoto]

Stupid question but I’m about to drop a grand on a manners stock so I’ll ask anyways.
I’ve had issues with my KRG and had to inlet it due to the very large recoil lug on the TL3 being near tangential to the outer diameter of the action. I also had to inlet the bolt knob area due to the oversized bolt knob.

Does anybody with a TL3 and manners mini chassis notice their recoil lug rubs on the sides? Any bolt knob clearance issues? Any compatibility issues are appreciated.

R/S
Awesymoto

 

[M338]

If it’s inlet for a bighorn,you won’t have a problem.
Rem 700 inlet and you will likely have to tweak the bolt cut out and the ejection port length.

 

[Zermatt Arms]

If it’s inlet for a bighorn,you won’t have a problem.
Rem 700 inlet and you will likely have to tweak the bolt cut out and the ejection port length.

This information is dead on!

 

[jda2631]

I agree, have 2 manners mini chassis both with TL3's, they were both inletted for the TL3 and fit has been perfect on both.

 

[Awesymoto]

Good to go thanks all!