For Sale or Trade:
Bootleg Inc. Complete Upper - 14.5" 223 Wylde / 13.4" Pic-Mod Rail / Adjustable Carrier / PWS Triad - Factory Built and Assembled Features:
Machined from forged 7075 Aluminum, Mil Spec Hard Anodizing, Forward assist eliminated for weight saving and reduced snag risk, Lightweight design 6.2 oz stripped (.8 oz lighter than a mil spec upper receiver). 1.7 oz lighter than a mil spec upper receiver with hardware installed, Captured dust cover door pin eliminating the need for the E clip, Increased barrel mounting circumference maintaining a solid barrel / receiver interface. Interference fit barrel extension interface for increased accuracy.
Bootleg 14.5" Barrel: - .223 WYLDE Chambered (14.5" Length)
Gas System – Mid-length
Barrel Twist – 1:8
Isonite QPQ
Bootleg Lightweight Adjustable Carrier
Machined from S7 Tool Steel - Lithium Isonite Coating
4 Setting Adjustable Vent System relieves excess gas pressure created from suppressor use creating longer dwell time and less blowback to the shooter.
Gas Adjustment can be turned while installed in the rifle
Unique Lightweight Design - Uses all standard mil spec components, Staked Mil Spec Gas Key, Adjustment Pin is easily removed for cleaning,
5.56 Phosphate Complete Bolt Assembly, Cam Pin, Firing Pin and Firing Pin retaining Pin Uses all Standard Mil Spec components.
Bolt 9310 (steel)
Cam pin 4340 (steel)
Firing pin 4140 (steel)
MPI Tested Bolt
13.4 in Bootleg PicMod™ Handguard
Extruded 6061 Aluminum, Mil Spec Hard Anodizing
BCM KMR Mounting System allows for easy installation for new builds or replacement of existing BCM KMR handguard.
Full Length Mil Spec Picatinny Top Rail
Excusive integrated PicMod™ Technology allows most picatinny accessories to mount without adapters while preserving a seamless flat KeyMod mounting surface
Extended PicMod Feature on the bottom section for increased bipod mounting options - Lightweight skeletonized design (8.6 oz without mounting hardware)
Bootleg Inc. Laser Engraved 5.56 Charging Handle
PWS Triad Flash Hider - UNPINNED (In case you wanted to change before Pinning)
Click link for LOADOUT ROOM Article / Review
Took this in on trade from another member. They said it had not been shot much at all. I have not personally fired a single round through it. It has been sitting in the safe for quite a while. I am open to trade for lower power optics or Tikka CTR stocks / chassis. I am willing to add cash for the right deal.
$500 Shipped
Bootleg Inc. Complete Upper - 14.5" 223 Wylde / 13.4" Pic-Mod Rail / Adjustable Carrier / PWS Triad - Factory Built and Assembled Features:
Machined from forged 7075 Aluminum, Mil Spec Hard Anodizing, Forward assist eliminated for weight saving and reduced snag risk, Lightweight design 6.2 oz stripped (.8 oz lighter than a mil spec upper receiver). 1.7 oz lighter than a mil spec upper receiver with hardware installed, Captured dust cover door pin eliminating the need for the E clip, Increased barrel mounting circumference maintaining a solid barrel / receiver interface. Interference fit barrel extension interface for increased accuracy.
Bootleg 14.5" Barrel: - .223 WYLDE Chambered (14.5" Length)
Gas System – Mid-length
Barrel Twist – 1:8
Isonite QPQ
Bootleg Lightweight Adjustable Carrier
Machined from S7 Tool Steel - Lithium Isonite Coating
4 Setting Adjustable Vent System relieves excess gas pressure created from suppressor use creating longer dwell time and less blowback to the shooter.
Gas Adjustment can be turned while installed in the rifle
Unique Lightweight Design - Uses all standard mil spec components, Staked Mil Spec Gas Key, Adjustment Pin is easily removed for cleaning,
5.56 Phosphate Complete Bolt Assembly, Cam Pin, Firing Pin and Firing Pin retaining Pin Uses all Standard Mil Spec components.
Bolt 9310 (steel)
Cam pin 4340 (steel)
Firing pin 4140 (steel)
MPI Tested Bolt
13.4 in Bootleg PicMod™ Handguard
Extruded 6061 Aluminum, Mil Spec Hard Anodizing
BCM KMR Mounting System allows for easy installation for new builds or replacement of existing BCM KMR handguard.
Full Length Mil Spec Picatinny Top Rail
Excusive integrated PicMod™ Technology allows most picatinny accessories to mount without adapters while preserving a seamless flat KeyMod mounting surface
Extended PicMod Feature on the bottom section for increased bipod mounting options - Lightweight skeletonized design (8.6 oz without mounting hardware)
Bootleg Inc. Laser Engraved 5.56 Charging Handle
PWS Triad Flash Hider - UNPINNED (In case you wanted to change before Pinning)
Click link for LOADOUT ROOM Article / Review
Took this in on trade from another member. They said it had not been shot much at all. I have not personally fired a single round through it. It has been sitting in the safe for quite a while. I am open to trade for lower power optics or Tikka CTR stocks / chassis. I am willing to add cash for the right deal.
$500 Shipped
Attachments
Last edited:
