Triebel Dies Question

[C130]

So, I bought a set of Triebel 6.5CM dies from someone on here a couple of weeks ago, they were selling three different Triebel die sets. I knew they were German made and checked out the US distributor, Creedmoor Sports, before buying them. They still had them on their website but I didn't realise they were no longer the only US distributor for Triebel and would not be restocking any of the Triebel items once sold out. Pretty frustrating but I'm an adult and should have done more research I guess. I also read several reviews before buying them and like most German made stuff they had great reviews.

So, does anyone familiar with Triebel know how to get any items for the Triebel dies? I don't think the seating stem I have will work with the Berger bullets I plan to use reloading so the seating die is pretty much worthless at this time. I am new to reloading so my knowledge is limited. Thanks

 

[spife7980]

Why wouldn’t the searing stem work?

 

[C130]

Triebel website calls for a different stem the way I'm reading it but hopefully I am wrong. The Berger bullets won't arrive until tomorrow so I will confirm at that time. I know the guy reloaded Horndy ELD Match 140g with the die.

 

[spife7980]

If it leaves a mark just polish the sharp edge down

If the tip bottoms out before the ogive contacts due to the bullet being longer than the stem was designed to accommodate: jb weld fill it in and make it a custom stem with a lubed bullet to make the form in the seating stem.
Here you can see one that the tip hits and falls off center due to the bullet being too long vs one that contacts all the way around the ogive.

 

[C130]

Thanks.

 

[918v]

If you lap the seater stem you may ruin it.