Trigger problems!!!! Help

[MULLINS2171]

I have a billet lower it has a "enhanced" trigger. When i pull the trigger its not resetting after i fire i have to charge with charging handle. Looks like the trigger is not resetting itself if the trigger is engaged. Where did mess up first time i habe had this happen

 

[Jigstick]

What lower, trigger, and safety are we talking about

 

[BullGear]

Check and make sure your trigger spring is installed properly. This is kinda common. If it's not that look at the disconnector hook on your hammer. If there's a burr on it, this could also cause your problem. If not those 2 things, then it could be an out of spec lower receiver.

I'm betting it's the spring.

 

[drewthebrave]

Does this happen during dry firing, or shooting live rounds?

 

[addertooth]

If using the charging handle resets it, it may be a case that your bolt is not going far enough back when the gun is fired to cock the trigger. This could be a low gas issue.

 

[impactaddict]

Does this happen during dry firing, or shooting live rounds?

This is my question too.. Wouldn't you have to cycle the bolt to get the trigger to reset if you're dry firing?