Waterbury Buckle Discontinued Hooks for the M1907 Sling/Our New Dies Are Finished
We have a back log due to Waterbury Buckle discontinuing their whole line of WWI and WWII hardware, including the Hook/Frog for the M1907 Slings. Our new dies were just finished about two weeks ago and we are back in business. We appreciate everyone's patience.
The only reason I am posting this is in direct response to a member's question as to wait times. Here is information I have posted on several forums including the CMP Forums. Here is the link to the CMP Post. There are photos of the new dies and videos of the dies producing the M1907 Hooks/Frogs, as well as photos of Rock Island Arsenal Drawings that we work from.
Waterbury Buckle Discontinued Hooks for the M1907 Sling/Our New Dies Are Finished - CMP Forums Waterbury Buckle Discontinued Hooks for the M1907 Sling/Our New Dies Are Finished
Well it happened again, called ITW Waterbury Buckle back in early February to place an order for M1907 Sling Hooks/Frogs, and discovered they had split and reorganized, discontinuing the hardware I had been buying for over 20 years. Not only did they discontinue the part, they scrapped the dies. Back in 1992, Waterbury bought out Brookside Manufacturing Corp. who was a military hardware contractor, and my first supplier for the hooks. Prior to the buyout, I along with another company contracted Brookside to make new dies since there original WWII dies were worn out.
Sad thing is, ITW Waterbury Buckle was one of the only manufacturers left that were producing the majority of older metal hardware for slings, such as the M1923 Sling and the M1 series of web slings. This includes the cam buckle, spring clip w/"D" ring for the rear swivel, and "N" buckle. Hope there is another manufacturer who produces these because it will hurt the web market, and I would hate to find out how much new dies for these parts would cost. I was told they had made changes and were geared more to the Clash hooks for the newer web slings. They scrapped a lot of dies and tooling, and moved Waterbury Buckle from Waterbury, CT to Broadview, IL. ITW Plastiglide is now located in their old plant in Waterbury, CT.
This is the second time over the past 25 years that this has happened. I lost another set of dies that was designed to punch a very distinctive brass hook used during WWI and was also appropriate for the M1887 Sling. Same story, company went out of business and dies were scraped before I found out, no notification on their part.
We have just had another set of punch and forming dies made. Fortunately a relative owns a tool & die shop locally and just completed the dies last week and after twice losing dies, I will keep a tight rein on these since they are in house. At the moment all our hardware will be made right here in Alabama except for our MILSPEC 13 gauge brass rivets which are made in the North East on our dies. We send the rivet dies out with the order and have them returned when the order is completed.
The hook dies were not cheap, but they are correct and the hooks/frogs, will have a smooth edge on the face of the hook, where as the progressive dies that Waterbury was using (blanked two hooks at a time to reduce waste), double blanked the hook, leaving a burred edge on half of the face of the hook. Our dies are progressive, but a little more handling per hook during the forming process.
Here are some photos of the new dies and some blanked out hooks. Haven't had a chance to form the samples at the moment, but we will test the forming dies and heat treat once it is determined if any adjustments need to be made. My cousin Kevin Lumpkin of Lumpkin Tool & Die has performed yeoman's work in designing the new dies per Rock Island Arsenal Drawing #7137567 which calls for .105 material with .109 diameter hole. We will be able to turn out both brass and steel hooks/frogs on the new dies.
We are still a family run shop, only three of us, myself, wife Camille, and son Stuart age 17. We are still operating out of an addition to our old barn here in Clay, Alabama. A lot of the equipment I use here in the shop to turn out M1907 Slings either came out of one of the arsenals or is the same make and model vintage equipment that was used during WWI and WWII. All the leather M1907 Slings have the correct oblong holes and are punched on vintage reciprocating punch presses identical to the ones Boyt used during WWII. I have traveled the country over the past 25 plus years acquiring the vintage equipment we use everyday in the shop. But the most difficult part has always been hardware suppliers, two rivet companies and three hardware companies have either closed their doors or discontinued the hardware over the past 25 years. Kevin built the dies, but I guess I'll have to spend time at his shop punching parts and then Parkerize them just as I have the "D" rings for years.
Semper Fi,
Richard Turner
You can go to the CMP Forums to view the original post, photos, Rock Island Arsenal Drawings, and videos.
Waterbury Buckle Discontinued Hooks for the M1907 Sling/Our New Dies Are Finished - CMP Forums So, I'm hoping this is just my spotty internet connection being dumb but I placed an order with Turner Saddlery via their website on July 8th for a new sling (not a second) and received on the 9th a confirmation email from Camille.
It's August 5th and still no sling, I know sometimes they said they got backed up but I tried to go to their site yesterday and today to see if there was any sort of notice and my computer keeps giving me the generic invalid address page. and my email won't let me send them an email.
Now, I live out in the sticks so I'm assuming coincidence but since I can't bug them, I ask you folks: How long is the average wait time for one of their slings? I can be patient, just so long as I know it's still coming eventually.
Thanks guys!
