Rifle Scopes viper pst?
- Thread starter chadg
- Start date
Re: viper pst?
Look about half way down the first page.
http://www.snipershide.com/forum/ubbthreads.php?ubb=showflat&Number=1499530#Post1499530
Look about half way down the first page.
http://www.snipershide.com/forum/ubbthreads.php?ubb=showflat&Number=1499530#Post1499530
Re: viper pst?
I think it will be a black tube about 30mm in diameter with an objective bell on one end of larger diameter and an ocular bell on the other end also a larger diameter but smaller in diameter than the objective bell. There is a good chance that midway between the two ends will be a control center used to adjust the elevation and windage in the 12 o'clock and 3 o'clock position and possibly a cotrol to eliminate parallax at the 9 o'clock position. But I could be wrong.
Smart ass, ain't I!!
I think it will be a black tube about 30mm in diameter with an objective bell on one end of larger diameter and an ocular bell on the other end also a larger diameter but smaller in diameter than the objective bell. There is a good chance that midway between the two ends will be a control center used to adjust the elevation and windage in the 12 o'clock and 3 o'clock position and possibly a cotrol to eliminate parallax at the 9 o'clock position. But I could be wrong.
Smart ass, ain't I!!
Re: viper pst?
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: fdkay</div><div class="ubbcode-body">I think it will be a black tube about 30mm in diameter with an objective bell on one end of larger diameter and an ocular bell on the other end also a larger diameter but smaller in diameter than the objective bell. There is a good chance that midway between the two ends will be a control center used to adjust the elevation and windage in the 12 o'clock and 3 o'clock position and possibly a cotrol to eliminate parallax at the 9 o'clock position. But I could be wrong.
Smart ass, ain't I!! </div></div>
Why yes,yes you are..........
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: fdkay</div><div class="ubbcode-body">I think it will be a black tube about 30mm in diameter with an objective bell on one end of larger diameter and an ocular bell on the other end also a larger diameter but smaller in diameter than the objective bell. There is a good chance that midway between the two ends will be a control center used to adjust the elevation and windage in the 12 o'clock and 3 o'clock position and possibly a cotrol to eliminate parallax at the 9 o'clock position. But I could be wrong.
Smart ass, ain't I!! </div></div>
Why yes,yes you are..........
Similar threads
