volquartesen trigger for 10/22?
- Thread starter signal5
- Start date
Re: volquartesen trigger for 10/22?
Not sure but you might want to check out just getting the target hammer it says it drops pull weight down to 2.5 -2.75 lbs and is 1/5 the cost of the complete trigger. Here is a link
Target Hammer
Not sure but you might want to check out just getting the target hammer it says it drops pull weight down to 2.5 -2.75 lbs and is 1/5 the cost of the complete trigger. Here is a link
Target Hammer
Re: volquartesen trigger for 10/22?
It's an OK trigger, 2-2 1/2# but a waste of $130 over putting a PowerCustom hammer/sear kit in for $60-70.
I consider any amount over $70 a waste unless you jump to the $300 level and get something of completely different design from the original Ruger design, like a KID.
It's an OK trigger, 2-2 1/2# but a waste of $130 over putting a PowerCustom hammer/sear kit in for $60-70.
I consider any amount over $70 a waste unless you jump to the $300 level and get something of completely different design from the original Ruger design, like a KID.
Re: volquartesen trigger for 10/22?
I have a VQ trigger, a factory trigger with VQ parts, and a Kidd trigger. In the future I plan on only having Kidd triggers.
I have a VQ trigger, a factory trigger with VQ parts, and a Kidd trigger. In the future I plan on only having Kidd triggers.
Re: volquartesen trigger for 10/22?
Years ago, when Tom built my rifle, the trigger was a little over 2#. I bought a couple of his hammers to put in my son's rifles, and they brought the trigger pull down about the same.
One of these days, I'll invest in a Kidd trigger.
Years ago, when Tom built my rifle, the trigger was a little over 2#. I bought a couple of his hammers to put in my son's rifles, and they brought the trigger pull down about the same.
One of these days, I'll invest in a Kidd trigger.
Re: volquartesen trigger for 10/22?
The pull weight is just under 3lbs. To me not worth the money either up the enty and go with a Kidd trigger or just replace the Power Custom sear kit which will give the same trigger pull as the VQ. I did it my self and just very carefully filed down slight where engagement of the sear occurs. It lessen my trigger down to under 3lbs.
The pull weight is just under 3lbs. To me not worth the money either up the enty and go with a Kidd trigger or just replace the Power Custom sear kit which will give the same trigger pull as the VQ. I did it my self and just very carefully filed down slight where engagement of the sear occurs. It lessen my trigger down to under 3lbs.
Re: volquartesen trigger for 10/22?
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: nwsnowbum</div><div class="ubbcode-body">I have a VQ trigger, a factory trigger with VQ parts, and a Kidd trigger. In the future I plan on only having Kidd triggers. </div></div>
This is what I have heard everyone say that has shot both. The Kidd Trigger is an excellent trigger. I really like the one that I have.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: nwsnowbum</div><div class="ubbcode-body">I have a VQ trigger, a factory trigger with VQ parts, and a Kidd trigger. In the future I plan on only having Kidd triggers. </div></div>
This is what I have heard everyone say that has shot both. The Kidd Trigger is an excellent trigger. I really like the one that I have.
Re: volquartesen trigger for 10/22?
I put the hammer kit in my 10/22. It is light, but mushy. For a serious target gun I would want something chrisper
I put the hammer kit in my 10/22. It is light, but mushy. For a serious target gun I would want something chrisper
Re: volquartesen trigger for 10/22?
spend the extra and buy a KIDD have owned a VQ and it doesnt even come close
spend the extra and buy a KIDD have owned a VQ and it doesnt even come close
Re: volquartesen trigger for 10/22?
my volquartsen breaks at 2-lb,, expensive,,but a huge improvement over the factory 6lb pull. haven't tried other brands.
my volquartsen breaks at 2-lb,, expensive,,but a huge improvement over the factory 6lb pull. haven't tried other brands.
