I ordered one on Tuesday. Took the plunge.
I took the plunge also! Mine is due Jan 11. I also just changed my order from a 22" Shilen to a 22" ACE. Hope that wasn't a mistake....
I ordered one on Tuesday. Took the plunge.
I’m sure you will be quite happy with the Ace barrel man. Those boys at VGW know how to turn out some barrels that flat out shootI took the plunge also! Mine is due Jan 11. I also just changed my order from a 22" Shilen to a 22" ACE. Hope that wasn't a mistake....
It wasn't!I took the plunge also! Mine is due Jan 11. I also just changed my order from a 22" Shilen to a 22" ACE. Hope that wasn't a mistake....
I have an ACE on mine. (18.5”) it shoots very well. You won’t regret it.I took the plunge also! Mine is due Jan 11. I also just changed my order from a 22" Shilen to a 22" ACE. Hope that wasn't a mistake....
I have shot well over 15k rounds of cci sv in my vudoo. Other than less accuracy and consistency and a bit harder bolt close i have had zero fail to feed or extract. Mine is 13 months old so maybe its different from yours?I've read through a ton of this thread, but could have missed it with 138 pages so far. So, I apologize if I missed this topic.
Has anyone had a barrel chambered to run the CCI SV ammo. I know it's not anywhere near the stuff that most of you guys are running, and would be less accurate, but my appetite for shooting goes down considerably as the cost of ammo goes up. I think it would be awesome to have a barrel set up for the CCI SV so that it would feed it and eject it smoothly. I also have a very early Vudoo from 2017, so maybe there have been updates so CCI SV works better, I'm not sure.
What do you guys think? Anyone else interested? Anyone already figured this out?
I just got my zco 420 on Monday now waiting on the barreled action going in a MPA lite chassis
Can't wait. I plan on using a TT special any issues with this trigger heard that some people had
Problems
20" Bartlein MTU
Good luck. I was initially told 3 months and I'm over 5 months now and nothing.This makes my wait time, excruciating. I'm looking at the end of February for my new Vudoo.
Oh boy, this scares me. Mine is supposed to be here on 11/27. Did you order some exotic part that is holding it up?Good luck. I was initially told 3 months and I'm over 5 months now and nothing.
That's disheartening. Although I hate waiting as much as anyone, I guess I don't mind waiting on perfection. Also curious if you ordered something special?Good luck. I was initially told 3 months and I'm over 5 months now and nothing.
I have shot well over 15k rounds of cci sv in my vudoo. Other than less accuracy and consistency and a bit harder bolt close i have had zero fail to feed or extract. Mine is 13 months old so maybe its different from yours?
Would i rather shoot center x or sk of course. But had i done that my last years ammo bill would have been over 4 k .
I bought cci sv when it was 220 a case and stocked up.
Of the 3 bricks of center x i bought with my rifle i have 1 left .Use it for special occasions.
I think that’s been resolved, it may need a different sear. Worth it to have VGW to stick the trigger on it if you’re worried.
Bergara sells a barreled .22 action that has the same footprint as the R700. If you want to shoot lower cost ammo I recommend you look into it.I hear what you're saying, but I can't use any chassis/stock and r700 trigger I have with a Tikka.
That’s what I just built while I wait for my Voodoo to get build. Is like waiting for a CAN to get out of jail.Bergara sells a barreled .22 action that has the same footprint as the R700. If you want to shoot lower cost ammo I recommend you look into it.
I think Grayboe had backed up. I told VGW that I didn't mind waiting. What's important is that I get a first-rate rifle.Oh boy, this scares me. Mine is supposed to be here on 11/27. Did you order some exotic part that is holding it up?
I did not. Grayboe and Timney.Oh boy, this scares me. Mine is supposed to be here on 11/27. Did you order some exotic part that is holding it up?
Great vid MB. I picked up the Xylo and it has an anti-rotation maglatch which is pretty sweet. I can push my Vudoo mag right into a barricade and have absolutely no problems.
Thanks Dude, I'd like to get a Xylo for a barreled action I have laying around.
MB
Thanks Dude, I'd like to get a Xylo for a barreled action I have laying around.
MB
You'll definitely like the Xylo. I have my Vudoo in one right now and it's awesome. LOP changes in seconds and a lot of useful features.
How are the stock adjustments if say you dropped a handful of dirt or sand into it?
I’m sure Ted didn’t overlook this as he knows these stocks will be used in field. The only hands on I’ve had was at shot show. I really liked the adjustment and how it works in dirty conditions was the only question I had.
How are the stock adjustments if say you dropped a handful of dirt or sand into it?
I’m sure Ted didn’t overlook this as he knows these stocks will be used in field. The only hands on I’ve had was at shot show. I really liked the adjustment and how it works in dirty conditions was the only question I had.
Thanks for the video!
I do have another question! Are any of the v22s modifications going to make an appearance on v3 v22? 60 deg bolt, 6 o'clock firing pin, etc?
Speaking of wanting another - just yesterday I've played with a left handed action at a match and as a lefty.....I believe I've been missing out this entire time......
Now I need to convince I've been good this year and give VGW a call.....but kinda afraid to hear the lead time on them...
Currently I have a 20" MTU in Cadex Defence Lite Competition Chassis, it's heavy...
Entertaining a proof barrel, but not sure if it would be a good choice for NRL22/X and Rimfire PRS type of shooting....since it seems like people put extra weights on their chassis....
Not sure on chassis but I do like MPA (got one on my cz455 and rem700)
My proof shoots pretty gooThe longer you wait, the longer the lead times
Don't get a Proof Barrel, it really doesn't make any sense unless you're trying to do a lightweight squirrel killer. Not only are you spending more on the barrel, it doesn't shoot as well as their Ace barrel, and you have to spend more money on weights...
Anyone running their Vudoo in a Manners TCS stock?
I'm interested in using a 20" barrel and would like to know by how far the muzzle will clear the ARCA rail. I don't see that spec listed on Manners web page.
Anyone running their Vudoo in a Manners TCS stock?
I'm interested in using a 20" barrel and would like to know by how far the muzzle will clear the ARCA rail. I don't see that spec listed on Manners web page.
Thanks, that is a whole lot of awesomeness.I am, with a 20" barrel and it's friggin awesome.
MB