We need an M4A03 build guide

[wallbanger]

I think we need an M4A03 build guide the same as M4A01. What do you guys think? I just came into a few parts and am getting interested in continuing the build. Lets get the ball rolling boys. I just came into an untouched 5 digit Rem. 700 SA and it's going on it. Maybe there is this topic already but I can't find it.

 

[shawn b]

Re: We need an M4A03 build guide

If you want to build as close to spec as you can your going to need to ditch the 5 digit and pick up a G prefix.

 

[shawn b]

Re: We need an M4A03 build guide

Here is a good deal on the scope rail....
http://www.snipershide.com/forum/ubbthreads.php?ubb=showflat&Number=1129467&gonew=1#UNREAD

 

[wallbanger]

Re: We need an M4A03 build guide

Yes sir, if I can't find one I will use this one. Thanks bro.

 

[shawn b]

Re: We need an M4A03 build guide

Here you go.
http://www.snipershide.com/forum/ubbthreads.php?ubb=showflat&Number=1129467&gonew=1#UNREAD

 

[shawn b]

Re: We need an M4A03 build guide

And a shout out to GAP .....they build one hell of a nice rifle!

 

[wallbanger]

Re: We need an M4A03 build guide

I guess this thread isn't really needed. Just take the M4A01 and bolt it into an A-4.

 

[7mmRM]

Re: We need an M4A03 build guide

M40A3


Action-
* Remington 700 S/A, Trued.
* Optic Mount holes open up to 8/40 threads
* Rear receiver bridge is milled off to accept flat bottom DD Ross mount
* action slotted to accept Ross mount

Trigger-
* M24 trigger

Recoil lug-
* DDRoss lug

BBL-
* Schineder Stainless Steel, 1/12 twist, 6groove. Finnished at 25"( USMC measures 24" from the recoil lug)
* 1.200x3, Finnished .925 @ 25"
* Crown- 45 degree pull back, .090" deep

Bottom metal-
* Pre 2007 M40A3s used DDRoss bottom metal
* Current M40A3s use a Badger DBM system w/ 5rnd & 10rnd mags

Stock-
* McMillan A4 molded in OD green. Spacer LOP. Saddle cheek piece. Sniper fill. 1stud, 6 flush cups.
* Inletted for Badger DBM or DDRoss
* When ordering from McMillan- ask for a USMC spec stock, with bottom metal specified.
* Pillar bedded
* Bedded with Marine tex- 1.5" BBL pad.

Optic & mounts-
* Pre 2006 M40A3s used a 1"tube fixed 10x Unertl- also made by United States Optics(MST100)
* Post 2006 M40A3s use a 34mm Schmidt&Bender PMII 3x12x50FFP, Gen2 Mildot Reticle by Premier Reticles. MTC knobs.
* DD Ross 30MOA lugged base
* Badger Ordnance USMC contract rings- 6 screw front ring, 4screw rear ring.
* 34mm Rings for the S&B
* 30mm w/ 1" inserts for the MST100,
* SIMRAD Cap

Current M40A3s employ a foreward mounted PVS22 mount (Bedded in the stock). These are made by PGW.

Sling-
Tactical Intervention Specialists
Quick Cuff Sling
Tan color

Contacts-

Schnieder Rifle Barrels
1403 Red Baron
Payson, AZ 85541
1-928-474-2852

DD Ross Company
Medina, OH 44256
1-330-725-3032

McMillan Fiberglass Stocks
1638 W. Knudsen Dr., Suite 101
Phoenix, AZ 85027 USA
Phone 623.582.9635
Fax 623.581.3825

Badger Ordnance
1141 Swift St.
N.Kansas City, MO. 64116

PGW Defence Technologies INC
P.O. Box 41057
Winnipeg, Manitoba, Canada

Tactical Intervention Specialists
2431 Peralta Office K
Oakland California 94607
1-(510)-919-7286

 

[wallbanger]

Re: We need an M4A03 build guide

Nuff said. Thanks 7mmRM.

 

[padronanniversary]

Re: We need an M4A03 build guide

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: shawn b</div><div class="ubbcode-body"> And a shout out to GAP .....they build one hell of a nice rifle!

</div></div>

Was this stock painted, or molded in ? Love the look of it !

 

[shawn b]

Re: We need an M4A03 build guide

Painted .....other side.....

 

[Jason_R]

Re: We need an M4A03 build guide

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: shawn b</div><div class="ubbcode-body"> Painted .....other side.....

</div></div>

What are the specs on that rifle?

 

[shawn b]

Re: We need an M4A03 build guide

7mmRM posted the specs above, this is the post 2007 with the Badger DBM. Without the PGW NV mount.....maybe one day.