Gunsmithing What fasteners are on my Manners limbsaver?

[Doyputasos]

I came across the post below, but it is regarding the adjustable butt spacer system. The claim there is that the cap screws use a 5/32" Allen wrench but I can tell that is not fitting the bill. I tried the few around the 5/32 and didn't get a fit. I don't want to screw up the heads of whatever is holding my limbsaver to the butt of my stock. Any clue?

http://www.snipershide.com/shooting...8659-manners-adjustable-lop-system-print.html

 

[The_FNG]

They're not torx head by any chance?

 

[Doyputasos]

Nah, I've felt them with a very small Allen wrench. They are hex shaped.

 

[nzgrip]

Try some metric allen wrenches or Torx. Torx can work in a hex if you get the right size.

 

[Doyputasos]

I really don't want to chew up the socket. I emailed manners and I will post here when I get the answer since my site and Google searches came up empty.

 

[Doyputasos]

Looks like Im not in luck. The decelerator pad is glued to the stock on that model. So much for getting an accurate feel with the small Allen wrench. The tech at Manners says the holes are in the stock from where they mounted and fitted the recoil pad.