• The Shot You’ll Never Forget Giveaway - Enter To Win A Barrel From Rifle Barrel Blanks!

    Tell us about the best or most memorable shot you’ve ever taken. Contest ends June 13th and remember: subscribe for a better chance of winning!

    Join contest Subscribe

Who wants to do a bullet review ?

Lowlight

HMFIC of this Shit
Staff member
Moderator
Supporter
Minuteman
  • Apr 12, 2001
    36,339
    44,091
    Base of the Rockies
    www.snipershide.com
    Received an inquiry about reviewing some bullets for the Hide,

    So I want to know, who out there is reloading, been a member with more than a handful of posts who wants to be put in contact with the company to do a review?

    Let me know, reference a post or two for me to review, and we can set it up,

    Must be able to reload, and shoot during the pandemic lock down
     
    • Like
    Reactions: clcustom1911
    Not the reloading part as its loaded test ammo, but I've been doing this for McCourt Munitions for a while now with great results and we put together somewhat of a standardized testing parameter.

    I have an entire room in the house for reloading, so I can figure that part out as long as they give me some basics as to what they want and/or have specific things they would send, i.e. if they wanted to use specific cases or primers, etc.
     
    If no one wants 300blk subs I volunteer. I have a good load to test against.

    The load was recommended by @spife7980 and better than any other we have tested.
    20190731_173340.jpg
     
    Received an inquiry about reviewing some bullets for the Hide,

    So I want to know, who out there is reloading, been a member with more than a handful of posts who wants to be put in contact with the company to do a review?

    Let me know, reference a post or two for me to review, and we can set it up,

    Must be able to reload, and shoot during the pandemic lock down

    I'm in on some testing.
     
    Would a humble Swede qualify to do a review?

    I have a Sako TRG22 in 308 and a rebuilt Remington 700 in 300 WM to use as test platforms. I also have prior experience with product development from the mountainbike industry.
     
    Last edited: